Related papers: The Critical Current Density in Polycrystalline HT…
The critical current density (Jc) through a superconductor in high magnetic fields is controlled by the inclusions and microstructure of the material that hold fluxons stationary to keep the resistance zero and is described using…
A study has been perfomed on the superconducting critical current density J_{c} flowing across low angle grain boundaries in epitaxial thin films of YBa{2}Cu{3}O{7-d} (YBCO). The materials studied were dual grain boundary rings deposited on…
We investigate the in-field critical current density Jc(B) of SNS Josephson Junctions (JJs) and polycrystalline superconductors with grain boundaries modelled as Josephson type planar defects, both analytically and through computational…
The dependence of the critical current density Jc on hydrostatic pressure to 0.6 GPa is determined for a single 25-degree [001]-tilt grain boundary in a bicrystalline ring of nearly optimally doped melt-textured YBa2Cu3Ox. Jc is found to…
Nb3Sn superconductors have significant applications in constructing high-field (> 10 T) magnets. This article briefly reviews development of Nb3Sn superconductor and proposes prospects for further improvement. It is shown that significant…
Grain boundaries (GBs) have been shown to limit critical current density, Jc, in YBa2Cu3O7 (YBCO) coated conductors. Here we use transport measurements and scanning Hall probe microscopy coupled with current reconstruction to demonstrate…
A series of polycrystalline SmFeAs1-xOx bulks was prepared to systematically investigate the influence of sample density on flux pinning properties. Different sample densities were achieved by controlling the pelletizing pressure. The…
The interface properties of high-temperature cuprate superconductors have been of interest for many years, and play an essential role in Josephson junctions, superconducting cables, and microwave electronics. In particular, the maximum…
In order to understand why the inter- and intra-granular current densities of polycrystalline superconducting oxypnictides differ by three orders of magnitude, we have conducted combined magneto-optical and microstructural examinations of…
Detailed measurements of the critical current density jc of YBa2Cu3O7 films grown by pulsed laser deposition reveal the increase of jc as function of the filmthickness. Both this thickness dependence and the field dependence of the critical…
The critical current (Jc) of highly twinned YBa2Cu3O7 films has been measured as a function of temperature, magnetic field and angle. For much of the parameter space we observe a strong suppression of Jc for fields in the twin boundary (TB)…
If the critical current density Jc is very high for a superconductor, then estimating its value from transport measurements is not very easy. In such cases, the value of Jc, called Jcm for magnetic Jc, is usually obtained from the measured…
Accessing the intrinsic critical current density (Jc*) in type II superconductors has significant fundamental and technological potential, both as a probe of the microscopic superconducting properties and as a means to increase current…
Critical current density Jc in polycrystalline or granular superconducting material is known to be hysteretic with applied field H due to the focusing of field within the boundary between adjacent grains. This is of concern in the so-called…
We report DC isothermal magnetization, global critical current density (JC), Intra-grain critical current density (JCintra) and resistive upper critical field (Bc2) of polycrystalline Y1-xCaxBa2Cu3O7-{\delta} (YBCO); x = 0.00, 0.05, 0.10,…
Although the flux density map of a bulk superconductor provides in principle sufficient information for calculating the magnitude and the direction of the supercurrent flow, the inversion of the Biot-Savart law is ill conditioned for thick…
A rapid decrease in the critical current density (Jc) of YBa2Cu3O7-x (YBCO) films with increasing film thickness has been observed for multiple YBCO growth processes. While such behavior is predicted from 2D collective pinning models under…
We have studied the local critical current density, jc, in the superconductor thin film of bilayer structures consisting of YBa2Cu3O7 and the ferromagnets La2/3Ca1/3MnO3 and SrRuO3, respectively, by means of quantitative magneto-optics. A…
The critical current density of epitaxial YBCO films grown on vicinal SrTiO3 substrates was investigated by electrical transport measurements along and across the steps of the SrTiO3 surface for a range of temperatures of 10 K to 85 K and…
The importance of the distribution and ``weakness'' of grain boundary junctions in the magnetic field dependence of the transport critical current in HTc films is assessed through simulations. The system is studied with the applied field…