Related papers: MOD derived pyrochlore films as buffer layer for a…

Thin films of the superconductor YBa$_2$Cu$_3$O$_{7-\delta}$ (YBCO) were modified by low-energy light-ion irradiation employing collimated or focused He$^+$ beams, and the long-term stability of irradiation-induced defects was investigated.…

Bi2Sr2Ca1Cu2O8+d (Bi-2212) thin films with thicknesses less than 50 nm (<20 unit cells) are grown by pulsed laser deposition (PLD) onto (001) LaAlO3 (LAO) single crystal substrates. Phase-pure and smooth c-axis oriented Bi-2212 films with…

In this paper Al doped ZnO (AZO) thin films with 0, 3, 6 and 12 at. % Al concentration were prepared by sol-gel method on glass substrates. The deposited films were annealed at different temperatures of 300, 350, 400, 450 and 500 {\deg}C…

In this work, we report a strengthened superheating effect caused by a buffering YBa2Cu3Oy (Y123 or YBCO) layer in the Nd1+xBa2-xCu3O7-y (Nd123 or NdBCO) thin film with MgO substrate (i.e., NdBCO/YBCO/MgO thin film). In the cold-seeding…

Thin films of phase pure pyrochlore Gd2Ti2O7 have been synthesized by RF magnetron sputtering. The films were prepared from oxide targets in 50%O2/Ar atmosphere and deposited on 111 YSZ substrates at a temperature of 800C. The pyrochlore…

Atomically-abrupt interfaces in transition metal oxide (TMO) heterostructures could host a variety of exotic condensed matter phases that may not be found in the bulk materials at equilibrium. A critical step in the development of such…

We report on the structural, electrical and magnetic properties of ZnCoO thin films grown by Atomic Layer Deposition (ALD) method using reactive organic precursors of zinc and cobalt. As a zinc precursor we applied either dimethylzinc or…

The fabrication of free-standing ultra-thin films from high-temperature (high-Tc) superconductors is of great interest for the development of superconducting nanowire single-photon detectors with high operating temperatures. We successfully…

The dynamics of the charge ordered (CO) state under non-equilibrium conditions created by strong dc-electric field (~106 V/cm) and photo-illumination with short (~ 6 ns) laser pulses is investigated in Bi1-xCaxMnO3 (x > 0.5) epitaxial…

Ruthenium dioxide (RuO$_2$) thin films were synthesized by Chemical Solution Deposition (CSD) on silicon substrates using only water and acetic acid as solvents. The microstructure, phase-purity, electrical and optical properties as well as…

Ca- and Zn-subsituted Y1-xCaxBa2(Cu1-yZny)O7-delta (x = 0, 0.05 and y = 0, 0.02, 0.04, 0.05) thin films were grown on SrTiO3 (100) substrates using the pulsed laser deposition (PLD) technique. Effects of various growth parameters on the…

Epitaxial bilayers of ferromagnetic La2/3Ca1/3MnO3 (LCMO) and superconducting YBa2Cu3O7-d (YBCO) have been grown on single-crystalline SrTiO3 (STO) substrates by pulsed laser deposition. The Manganese magnetization profile across the FM…

Thin films of optimally-doped (001)-oriented YBa2Cu3O7-{\delta} are epitaxially integrated on silicon (001) through growth on a single crystalline SrTiO3 buffer. The former is grown using pulsed-laser deposition and the latter is grown on…

The pyrochlore vanadates are compelling candidates for next-generation dissipationless devices. Lu2V2O7 and Y2V2O7 are ferromagnetic insulators (Tc ~ 70 K) that are believed to exhibit the magnon Hall effect and are expected to host…

The temperature dependence of the relaxation dynamics in the bilayer thin film heterostructure composed of multiferroic BiFeO$_{3}$ (BFO) and superconducting YBa$_{2}$Cu$_{3}$O$_{7}$ (YBCO) grown on a (001) SrTiO$_{3}$ substrate is studied…

In this work, we report the preparation of a superconductor thin film of the BSCCO system using a good quality powder with nominal composition Bi_{1.8}Pb_{0.4}Sr_2CaCu_2O_x which was thermally treated using a domestic microwave oven (2.45…

We report hole and electron doping in La-doped YBa$_2$Cu$_3$O$_y$(YBCO) thin films synthesized by pulsed laser deposition technique and subsequent \emph{in-situ} postannealing in oxygen ambient and vaccum. The $n$-type samples show a…

Freestanding GdBa2Cu3O7 (GdBCO) superconducting thin films were fabricated using a water-soluble Sr3Al2O6 (SAO) sacrificial layer in combination with thermal release tape. An amorphous Al2O3 capping layer was introduced to suppress crack…

Much smoother surfaces and significantly improved superconducting properties of relatively thick YBa2Cu3O7 (YBCO) films have been achieved by introducing a multilayered structure with alternating main YBCO and additional NdBCO layers. The…

Layered perovskite La2CuO4+delta(LCO) thin films were epitaxially grown on SrTiO3 (STO) and LaSrAlO4 (LSAO) substrates by atomic-layer-by-layer molecular beam epitaxy. The lattice de-fects and residual strain in these films were…