Related papers: The ATA Digital Processing Requirements are Driven…
Radio Frequency Interference (RFI) is a growing concern in the radio astronomy community. Single-dish telescopes are particularly susceptible to RFI. Several methods have been developed to cope with RF-polluted environments, based on…
Radio interferometers are phased arrays producing high-resolution images from the covariance matrix of measurements. Calibration of such instruments is necessary and is a critical task. This is how the estimation of instrumental errors is…
The digital revolution is transforming astronomy from a data-starved to a data-submerged science. Instruments such as the Atacama Large Millimeter Array (ALMA), the Large Synoptic Survey Telescope (LSST), and the Square Kilometer Array…
Backed by advances in digital electronics, signal processing, computation, and storage technologies, aperture arrays, which had strongly influenced the design of telescopes in the early years of radio astronomy, have made a comeback. Amid…
The Allen Telescope Array (ATA) is a cm-wave interferometer in California, comprising 42 antenna elements with 6-m diameter dishes. We characterize the antenna optical accuracy using two-antenna interferometry and radio holography. The…
Radio-astronomy is about to embark on a new way of doing science. The revolution that is about to take place is not due to the enormous sensitivity of the Square Kilometre Array, which is still a decade away, but due to its pathfinders,…
In this paper we present an interference detection toolbox consisting of a high dynamic range Digital Fast-Fourier-Transform spectrometer (DFFT, based on FPGA-technology) and data analysis software for automated radio frequency interference…
The low-frequency radio telescope of the Square Kilometre Array (SKA) is being built by the international radio astronomical community to (i) have orders of magnitude higher sensitivity and (ii) be able to map the sky several hundred times…
The Allen Telescope Array is a multi-user instrument and will perform simultaneous radio astronomy and radio SETI (search for extra-terrestrial intelligence) observations. It is a multi-beam instrument, with 16 independently steerable…
Radio astronomy is facing critical challenges due to an ever-increasing human-made signal density filling up the radio spectrum. With the rise of satellites, mobile networks, and other wireless technologies, radio telescopes are struggling…
The Square Kilometre Array (SKA) is expected to start science operations in 2030 and by that time there could be up to 10$^5$ artificial satellites in Earth's orbit, comprising an increase of an order of magnitude compared to 2024. Most of…
RFI mitigation is a critically important issue in radio astronomy using existing instruments as well as in the development of next-generation radio telescopes, such as the Square Kilometer Array (SKA). Most designs for the SKA involve…
The Murchison Widefield Array (MWA) is a new low-frequency interferometric radio telescope built in Western Australia at one of the locations of the future Square Kilometre Array (SKA). We describe the automated radio-frequency interference…
The domain of radio astronomy is currently facing significant computational challenges, foremost amongst which are those posed by the development of the world's largest radio telescope, the Square Kilometre Array (SKA). Preliminary…
The Square Kilometre Array (SKA) project is an international effort to build the world's most sensitive radio telescope operating in the 50 MHz to 14 GHz frequency range. Construction of the SKA is divided into phases, with the first phase…
Radio Frequency Interference (RFI) increasingly contaminates the radio astronomy spectrum, often exceeding astronomical signal amplitudes by 50-70 dB. Reliable detection and mitigation are therefore essential for studies of faint transient…
The Allen Telescope Array (ATA) is a Large-Number-Small-Diameter radio telescope array currently with 42 individual antennas and 5 independent back-end science systems (2 imaging FX correlators and 3 time domain beam formers) located at the…
The Square Kilometre Array (SKA) project is an international effort to build the world's most sensitive radio telescope operating in the 50 MHz to 14 GHz frequency range. Construction of the SKA is divided into phases, with the first phase…
Densely-packed, all-digital aperture arrays form a key area of technology development required for the Square Kilometre Array (SKA) radio telescope. The design of real-time signal processing systems for digital aperture arrays is currently…
Contemporary real-time RFI mitigation is carried out at different stages primarily using regulatory and technical approaches. Regulatory approaches include spectrum management, radio quiet zones, and ensuring protection from self-generated…