Related papers: Dynamic response of open cell dry foams
We report on experimental measurements of the flow behavior of a wet, two-dimensional foam under conditions of slow, steady shear. The initial response of the foam is elastic. Above the yield strain, the foam begins to flow. The flow…
Foams exhibit absorptive properties and are widely used for cleaning contaminants, oil recovery, and selective mineral extraction via froth flotation. Although foam absorption has historically been linked to equilibrium osmotic pressure,…
The mechanical response of syntactic foams comprising hollow thermoplastic microspheres (HTMs) embedded in a polyurethane matrix were experimentally examined under uniaxial compressive strain. Phenomenological strain energy models were…
We have developed a realistic simulation of 2D dry foams under quasi-static shear. After a short transient, a shear-banding instability is observed. These results are compared with measurements obtained on real 2D (confined) foams. The…
The shear response of soft solids can be modeled with linear elasticity, provided the forcing is slow and weak. Both of these approximations must break down when the material loses rigidity, such as in foams and emulsions at their…
Using numerical simulations, we characterized the behavior of an elastic membrane immersed in an active fluid. Our findings reveal a nontrivial folding and re-expansion of the membrane that is controlled by the interplay of its resistance…
We measure the response of open-cell polyurethane foams filled with a dense suspension of fumed silica particles in polyethylene glycol at compression speeds spanning several orders of magnitude. The gradual compressive stress increase of…
We propose a simple mathematical model to describe the mechanical relaxation of cells within a curved epithelial tissue layer represented by an arbitrary curve in two-dimensional space. This model generalises previous one-dimensional models…
We present dynamical effects on conformation in a simple bead-spring model consisting of three beads connected by two stiff springs. The conformation defined by the bending angle between the two springs is determined not only by a given…
We perform molecular dynamic (MD) simulations of frictional non-thermal particles driven by an externally applied shear stress. After the system jams following a transient flow, we probe its mechanical response in order to clarify whether…
The yielding of foams, concentrated emulsions, pastes and other soft materials under applied strain is often characterized by measuring the complex shear modulus as a function of strain amplitude at low frequency. Results obtained for…
We apply a recently developed model of cytoskeletal force generation to study a cell intrinsic contractility, as well as its response to external loading. The model is based on a non-equilibrium thermodynamic treatment of the…
To develop a minimal model for a cell moving in a crowded environment such as in tissue, we investigate the response of a liquid drop of active matter moving on a flat rigid substrate to forces applied at its boundaries. We consider two…
Crumpled paper or drapery patterns are everyday examples of how elastic sheets can respond to external forcing. In this Letter, we study experimentally a novel sort of forcing. We consider a circular flexible plate clamped at its center and…
We investigate the ultraslow structural relaxation of ageing foams with rheologically-tunable continuous phases. We probe the bubble dynamics associated with pressure-driven foam coarsening using differential dynamic microscopy, which…
In this paper, I study the coarsening dynamics of two-dimensional dry foam sandwiched by deformable membranes. The time-varying deformation of the confining membranes gives rise to a significant alteration in the evolution of polygonal…
Under steady shear, a foam relaxes stress through intermittent rearrangements of bubbles accompanied by sudden drops in the stored elastic energy. We use a simple model of foam that incorporates both elasticity and dissipation to study the…
Graphene foams have recently attracted a great deal of interest for their possible use in technological applications, such as electrochemical storage devices, wearable electronics, and chemical sensing. In this work, we present…
A simple model for solid friction is analyzed. It is based on tangential springs representing interlocked asperities of the surfaces in contact. Each spring is given a maximal strain according to a probability distribution. At their maximal…
The mechanical behavior of closed-cell foams in compression is analyzed by means of the finite element simulation of a representative volume element of the microstructure. The digital model of the foam includes the most relevant details of…