Related papers: Design & Simulation of 128x Interpolator Filter

We present the first characterization results of Timespot1, an ASIC designed in CMOS 28 nm technology, featuring a $32 \times 32$ pixel matrix with a pitch of $55 ~ \mu m$. Timespot1 is the first small-size prototype, conceived to readout…

We have designed, fabricated and characterized absorptive thermal blocking filters for cryogenic microwave applications. The transmission line filter's input characteristic impedance is designed to match $50\,\Omega$ and its response has…

We present a unique application of OxRAM devices in CMOS Image Sensors (CIS) for dynamic range (DR) improvement. We propose a modified 3T-APS (Active Pixel Sensor) circuit that incorporates OxRAM in 1T-1R configuration. DR improvement is…

In this work we propose an adaptive linear receiver structure based on interpolated finite impulse response (FIR) filters with adaptive interpolators for direct sequence code division multiple access (DS-CDMA) systems in multipath channels.…

This paper presents a high speed and area efficient DWT processor based design for Image Compression applications. In this proposed design, pipelined partially serial architecture has been used to enhance the speed along with optimal…

This study investigates a high Q-factor spiral inductor fabricated by the CMOS (complementary metal oxide semiconductor) process and a post-process. The spiral inductor is manufactured on silicon substrate using the 0.35 micrometers CMOS…

This paper presents two innovative four-port probe stations developed by FormFactor Incorporated (FFI) and MPI Corporation (MPI), and a four-port calibration standard design up to 125 GHz for the probe stations. True four-port probing at…

The European X-ray Free Electron Laser (XFEL) will deliver 27000 fully coherent, high brilliance X-ray pulses per second each with a duration below 100 fs. This will allow the recording of diffraction patterns of single molecules and the…

Recent progress in the 4H-silicon-carbide-on-insulator (4H-SiCOI) platform has resulted in the demonstration of essential building blocks such as low-loss waveguides and microresonators. In this work, we add tunability to the 4H-SiCOI…

This paper considers the application of FPGA-based IIR filtering to increase the usable bandwidth of a piezoelectric transducer used in optical phase locking. We experimentally perform system identification of the interferometer system with…

Integrated-photonics microchips now enable a range of advanced functionalities for high-coherence applications such as data transmission, highly optimized physical sensors, and harnessing quantum states, but with cost, efficiency, and…

Data on board the future PLANCK Low Frequency Instrument (LFI), to measure the Cosmic Microwave Background (CMB) anisotropies, consist of $N$ differential temperature measurements, expanding a range of values we shall call $R$. Preliminary…

Modern computing workloads demand energy-efficient, high-bandwidth interconnects, motivating photonic interposers as an alternative to electrical links. Here we demonstrate a compact 3D silicon nitride (SiN) photonic interposer prototype…

We present an efficient fabrication method for absorptive microwave filters based on Eccosorb CR-124. Filters are fabricated from readily available parts and their cut-off frequency can be set by their length. They exhibit desirable…

The LHC is expected to reach luminosities up to 3000fb-1 and the innermost layer of the ATLAS upgrade plans to cope with higher occupancy and to decrease the pixel size. 3D-Si sensors are a good candidate for the innermost layer of the…

This paper presents a novel design procedure for wideband microstrip bandpass filters with non-equiripple filtering frequency responses and low sensitivity. Different from the traditional Chebyshev transfer function filters, the return loss…

One of the main bottlenecks in practical full-duplex systems is the oscillator phase noise, which bounds the possible cancellable self-interference power. In this paper, a digitaldomain self-interference cancellation scheme for full-duplex…

A room temperature operating Vertical External Cavity Surface Emitting Laser is applied around 1550 nm to intracavity laser absorption spectroscopy analyzed by time-resolved Fourier transform interferometry. At an equivalent pathlength of…

This paper presents a 4-channel beamforming TX implemented in 65nm CMOS. Each beamforming TX is comprised of a C-2C split-array multiphase switched-capacitor power amplifier (SAMP-SCPA). This is the first use of multiphase interpolation…

We stabilise a microwave oscillator at 9.6 GHz to an optical clock laser at 344 THz by using a fibre-based femtosecond laser frequency comb as a transfer oscillator. With a second frequency comb we measure independently the instability of…