Related papers: Study on the injection optimization and transverse…
For many next-generation high intensity proton accelerator applications including the Spallation Neutron Source (SNS), superconducting (SC) RF provides the technology of choice for the linac. In designing the superconducting cavity, several…
China Spallation Neutron Source (CSNS) will start commissioning in early 2018. The neutron spectra from the tungsten target bombarding by 1.6 GeV proton beam are very wide, namely white neutron spectra. Two white neutron beams schemed by…
The Cold-Neutron Inelastic Spectrometer (CNIS) is a direct-geometry, time-of-flight instrument designed for China Spallation Neutron Source (CSNS) and optimized to probe low-energy lattice and magnetic excitations. The instrument integrates…
In the National Spallation Neutron Source (NSNS) design, a 180 meter long transport line connects the 1 GeV linac to an accumulator ring. The linac beam has a current of 28 mA, pulse length of 1 ms, and 60 Hz rep rate. The high energy…
The back-streaming neutrons from the spallation target at CSNS are very intense, and can pose serious damage problems for the devices in the accelerator-target interface region. To tackle the problems, a possible scheme for this region was…
In photo injectors, the transverse emittance is one of the key measures of beam quality as it defines the possible performance of the whole facility. As such it is important to measure the emittance in photo injectors and ensure the…
We suggest a new on-axis injection scheme that uses two deflecting cavities to remove the tilt of the stored beam, and to kick the injected beam into the ring. In this new injection scheme, an injected beam with a certain angle is overlaid…
A superconducting radio-frequency (SRF) photo injector is in operation at the electron linac for beams with high brilliance and low emittance (ELBE) radiation center and generates continuous wave (CW) electron beams with high average…
The energy recovery linac test facility (ERL-TF), a compact ERL-FEL (free electron laser) two-purpose machine, was proposed at the Institute of High Energy Physics, Beijing. As one important component of the ERL-TF, the photo-injector…
The first phase of the HIE-ISOLDE project at CERN consists of a superconducting (SC) linac upgrade in order to increase the energy of post-accelerated radioactive ion beams from 2.8 MeV/u to over 10 MeV/u (for A/q = 4.5). In preparation for…
2D and 4D transverse phase-space of a low-energy ion-beam is measured with two of the most common emittance scanners. The article covers the description of the installation, the setup, the settings, the experiment and the benchmark of the…
Hadron beams develop intensity-dependent transverse-longitudinal correlations within radio-frequency quadrupole (RFQ) accelerating structures. These correlations are only visible in six-dimensional phase space and are destroyed by…
Controlling non-linear effects in the transverse dynamics of charged particle beams in circular accelerators opens new possibilities for controlling some of the beam properties. Beam splitting by crossing a stable 1D non-linear resonance is…
The match between the Linac beam energy and the energy determined by the bending field of the Booster magnets is crucial for rf capture, beam quality, and the transmission efficiency in a Booster cycle. The observation of the injection…
Cosmic muon spallation backgrounds are ubiquitous in low-background experiments. For liquid scintillator-based experiments searching for neutrinoless double-beta decay, the spallation product $^{10}$C is an important background in the…
The K130 Room Temperature Cyclotron (RTC) at the Variable Energy Cyclotron Centre (VECC), Kolkata has delivered a variety of ion beams for experimental programs with stable performance since the 1970s. The extracted beams are transported to…
The theory of the high temperature superconducting cuprates, which is based on the condensation of holes into strings in checker-board geometry, was successful to explain the elastically scattered Neutrons by spin waves. Here it is extended…
The Back-n white neutron beam line, which uses back-streaming white neutrons from the spallation target of the China Spallation Neutron Source, is used for nuclear data measurements. A Micromegas-based neutron detector with two variants was…
The fast extraction kicker system is one of the most important accelerator components, whose inner structure will be the main source of the impedance in the RCS. It is necessary to understand the kicker impedance before its installation…
Aerosol injectors applied in single-particle diffractive imaging experiments demonstrated their potential in efficiently delivering nanoparticles with high density. Continuous optimization of injector design is crucial for achieving…