Related papers: Work hardening behavior in a steel with multiple T…
The scope of this study is to understand the strength behaviour and fragment size of rocks during indirect, quasi-static, and dynamic tensile tests. Four rocks with different lithological characteristics namely, basalt, granite, sandstone…
A recently presented model is adapted to predict the effects of strain path change on the strain aging (bake hardening) behaviour of an ultra low carbon (ULC) steel. Samples pre-deformed by rolling were aged and then tested in uniaxial…
Ductile metals undergo a considerable amount of plastic deformation before failure. Void nucleation, growth and coalescence is the mechanism of failure in such metals. {\alpha}/{\beta} titanium alloys are ductile in nature and are widely…
The formation of modified Z-phase in a 12Cr1MoV (German grade: X20) tempered martensite ferritic (TMF) steel subjected to interrupted long-term creep-testing at 550$^{\circ}$C and 120 MPa was investigated. Quantitative volumetric…
This work reports a systematic study of the evolution of charge transport mechanism in granular ultra-thin films of palladium of thickness varying between 6nm and 2nm. While the films with thickness > 4nm exhibit metallic behaviour, that at…
Built on the tenets of rational thermodynamics, this article proposes a theory of strain gradient thermo-visco-plasticity for isotropic polycrystalline materials under high strain rates. The effect of micro-inertia, which arises due to…
The dynamic behavior of metals is governed by collective dislocation motion and interactions that strongly depend on the applied strain rate. Metals exhibit weak strain rate sensitivity (SRS) below a certain threshold, followed by a…
The objective of this work is to deconvolute the interaction of slip, twinning, and notch on the deformation response of an austenitic manganese (Hadfield) steel using detailed finite element simulations. The simulations employ a…
We systematically calculate the structure, formation enthalpy, formation free energy, elastic constants and electronic structure of Ti$_{0.98}$X$_{0.02}$ system by density functional theory (DFT) simulations to explore the effect of…
Shape memory effect associated with martensitic transformations is of the rapidly developing field in nanotechnologies, where industrial use of systems established on that effect provide greater flexibility on the nano-devices fabrication…
Along with high strength, plasticity is what makes metals so widely usable in our material world. Both strength and plasticity properties of a metal are defined by the motion of dislocations - line defects in the crystal lattice that divide…
We study the branching of twins appearing in shape memory alloys at the interface between austenite and martensite. In the framework of three-dimensional non-linear elasticity theory, we propose an explicit, low-energy construction of the…
We present the results of magnetization and magneto-transport measurements in the superconducting state of an as-cast Nb$_{75}$Zr$_{25}$ alloy. We also report the careful investigation of the microstructure of our sample at various length…
Using first-principles calculations based on density functional theory, we have studied the mechanical, electronic, and magnetic properties of Heusler alloys, namely, Ni$_{2}BC$ and Co$_{2}BC$ ($B$ = Sc, Ti, V, Cr and Mn as well as Y, Zr,…
In the present study, an attempt has been made to understand the effect of different competing mechanisms controlling the overall degree of sensitization (DOS) of deformed austenitic stainless steel at the early stage of sensitization. The…
Two ingots weighing 400 g and 5 kg with nominal compositions of Fe-8Mn-4Al-2Si-0.5C-0.07V-0.05Sn were produced to investigate the effect of processing variables on microstructure development. The larger casting has a cooling rate more…
Three novel precipitation strengthened bcc alloys which exhibit a smooth microstructural gradient with composition have been fabricated in bulk form by induction casting. All three alloys are comprised of a mixture of disordered A2-(Fe, Cr)…
The concept of an electronically-driven breaking of the rotational symmetry of a crystal, without involving magnetic order, has found experimental support in several systems, from semiconductor heterostructures and ruthenates, to cuprate…
We describe the microstructure, shape and dynamics of growth of a droplet of martensite nucleating in a parent austenite during a solid-solid transformation, using a Landau theory written in terms of conventional affine, elastic…
Resonant ultrasound spectroscopy and magnetic susceptibility experiments have been used to characterize strain coupling phenomena associated with structural and magnetic properties of the shape-memory Heusler alloy series…