Related papers: Higher Order Modes for Beam Diagnostics in Third H…
The control of beam phase relative to the accelerating RF field within a superconducting cavity is important in many accelerator applications and is of particular importance for a free electron laser facility. As standard practice, the…
A new Higher Order Mode (HOM) damper was designed and tested for the Booster accelerator cavity at Fermilab. In anticipation of the PIP-II upgrade, it was discovered that the higher beam intensity of PIP-II may cause beam instability due to…
To improve RHIC luminosity for heavy ion beam energies below 10 GeV/nucleon, the Low Energy RHIC electron Cooler (LEReC) is currently under commissioning at BNL. The Linac of LEReC is designed to deliver a 1.6 MeV to 2.6 MeV electron beam,…
With the recent discovery of Gravitational waves, marking the start of the new field of GW astronomy, the push for building more sensitive laser-interferometric gravitational wave detectors (GWD) has never been stronger. Balanced homodyne…
The third harmonic nine-cell cavity (3.9 GHz) for FLASH and the European XFEL has been investigated using simulations performed with the computer code CST Microwave Studio. The band structure of monopole, dipole, quadrupole and sextupole…
Higher order mode (HOM) damping is a crucial issue for the next generation of high-current energy recovery linacs (ERLs). Beam-induced HOMs can store sufficient energy in the superconducting RF (SRF) cavities, giving rise to beam…
Third harmonic cavities have been designed and fabricated by FNAL to be used at the FLASH/XFEL facility at DESY to minimise the energy spread along the bunches. Modes in these cavities are analysed and the sensitivity to frequency errors…
The CMS Beam Conditions and Radiation Monitoring System, BRM, will support beam tuning, protect the CMS detector from adverse beam conditions, and measure the accumulated dose close to or inside all sub-detectors. It is composed of…
There's presently a growing demand for cw high current proton and deuteron linear accelerators based on superconducting technology to better support various fields of science. Up to now, high order modes (HOMs) studies induced by ion beams…
We present an optimized geometry for a 1.3 GHz superconducting cavity in which the surface electromagnetic fields have been minimized and the bandwidth of the fundamental mode has been maximized. We refer to this design as the New Low…
A 3.9 GHz deflecting mode (pi, TM110) cavity has been long used for six-dimensional phase-space beam manipulation tests at the A0 Photo-Injector Lab (16 MeV) in Fermilab and their extended applications with vacuum cryomodules are currently…
The Accelerator Test Facility 2 (ATF2) is a scaled demonstrator system for final focus beam lines of linear high energy colliders. This paper describes the high resolution cavity beam position monitor (BPM) system, which is a part of the…
The resonant modes in the 9cell 3.9GHz bunch shaping cavity designed by FERMILAB in collaboration with DESY [1] and installed in FLASH at DESY were calculated up to the range of 10GHz in terms of the band structure of this design. The modal…
The utility of a passive fourth-harmonic cavity plays key role in suppressing longitudinal beam instabilities in the electron storage ring and lengthens the bunch by a factor of 2.6 for the phase II project of Hefei Light Source(HLS II).…
Experiments were performed at the Fermilab Accelerator Science and Technology (FAST) facility to elucidate the effects of long-range wakefields (LRWs) in TESLA-type superconducting rf cavities. In particular, we investigated the…
Finite-bandwidth resonances of high-order axial modes (HOAM) in an open gyrotron cavity are studied numerically using the GYROSIM problem-oriented software package for modelling, simulation and computer-aided design (CAD) of gyrotron tubes.
The first cryomodule for the beam test facility at the Fermilab New-Muon-Lab building is currently under RF commissioning. Among other diagnostics systems, the transverse position of the helium gas return pipe with the connected 1.3 GHz SRF…
We report the design and characterization of high frequency, resonant acousto-optic modulators (AOM) in a MEMS foundry process. The doubly-resonant cavity design, with short ($L{\sim}10.5\, {\mu}m$) acoustic and optical cavity lengths,…
This manuscript derives explicit factors linking mode-mismatch-induced power losses, in Hermite-Gauss optical modes to the losses of the fundamental spatial mode. Higher order modes are found to be more sensitive to beam parameter…
This article presents a method that uses turn-by-turn beam position data and k-modulation data to measure the calibration factors of beam position monitors in high energy accelerators. In this method, new algorithms have been developed to…