Related papers: Controller Design for A Stance-Control Knee-Ankle-…
In this paper, modification of the classical PID controller and development of open-loop control mechanisms to improve stability and robustness of a differential wheeled robot are discussed. To deploy the algorithm, a test platform has been…
For lower limb amputees, an active ankle joint prosthesis can provide basic mobility functions. This study focuses on an ankle joint prosthesis system based on the principle of electric-hydraulic actuation. By analyzing the characteristics…
Step adjustment can improve the gait robustness of biped robots, however the adaptation of step timing is often neglected as it gives rise to non-convex problems when optimized over several footsteps. In this paper, we argue that it is not…
In this paper we give a new control model based on the so called computed-torque method for the control of a 2 degrees of freedom orthosis for the rehabilitation of the lower limb, the AIRGAIT exoskeleton's leg orthosis. The actuation of…
We present a novel method for optimizing the posture of kinematically redundant torque-controlled robots to improve robustness during impacts. A rigid impact model is used as the basis for a configuration-dependent metric that quantifies…
In this paper, we present an integrated human-in-the-loop simulation paradigm for the design and evaluation of a lower extremity exoskeleton that is elastically strapped onto human lower limbs. The exoskeleton has 3 rotational DOFs on each…
Existing robotic lower-limb prostheses use autonomous control to address cyclic, locomotive tasks, but they are inadequate to operate the prosthesis for daily activities that are non-cyclic and unpredictable. To address this challenge, this…
Optimal control problems (OCPs) involve finding a control function for a dynamical system such that a cost functional is optimized. It is central to physical systems in both academia and industry. In this paper, we propose a novel…
Impedance-based control represents a prevalent strategy in the powered trans femoral prostheses because of its ability to reproduce natural walking. However, most existing studies have developed impedance-based prosthesis controllers for…
The design (shape) of a robot is usually decided before the control is implemented. This might limit how well the design is adapted to a task, as the suitability of the design is given by how well the robot performs in the task, which…
Predictive simulation of human motion could provide insight into optimal techniques. In repetitive or long-duration tasks, these simulations must predict fatigue-induced adaptation. However, most studies minimize cost function terms related…
Underactuated manipulators reduce the number of bulky motors, thereby enabling compact and mechanically robust designs. However, fewer actuators than joints means that the manipulator can only access a specific manifold within the joint…
We propose an integrated control architecture to address the gap that currently exists for efficient real-time implementation of MPC-based control approaches for highly nonlinear systems with fast dynamics and a large number of control…
The Orthoglide project aims at designing a new 3-axis machine tool for High Speed Machining. Basis kinematics is a 3 degree-of-freedom translational parallel mechanism. This basis was submitted to isotropic and manipulability constraints…
This work addresses the problem of kinematic trajectory planning for mobile manipulators with non-holonomic constraints, and holonomic operational-space tracking constraints. We obtain whole-body trajectories and time-varying kinematic…
We study the control of networked systems with the goal of optimizing both transient and steady-state performances while providing stability guarantees. Linear proportional-integral (PI) controllers are almost always used in practice, but…
Hybrid assistive systems that integrate functional electrical stimulation (FES) and robotic exoskeletons offer a promising approach for neurorehabilitation. However, control of these systems remains challenging due to actuator redundancy…
This paper presents a novel position control strategy for a single-link flexible manipulator, tailored for applications where precise position must be achieved within strict time constraints. To accomplish this objective, firstly, a nested…
Humans use tools to complete impact-aware tasks such as hammering a nail or playing tennis. The postures adopted to use these tools can significantly influence the performance of these tasks, where the force or velocity of the hand holding…
The optimal control problem for the kinematic bicycle model is considered where the trajectories are required to satisfy the safety constraints in the continuous-time sense. Based on the differential flatness property of the model,…