Related papers: Enhancing magnetocrystalline anisotropy of the Fe7…
We have achieved (001) oriented L10 (Fe1-xCux)55Pt45 thin films, with magnetic anisotropy up to 3.6x10^7 erg/cm^3, using atomic-scale multilayer sputtering and post annealing at 400 {\deg}C for 10 seconds. By fixing the Pt concentration,…
This work reports on the structural and magnetic properties of Mn$_{2.7-x}$Fe$_{x}$Ga$_{1.3}$ Heusler films with different Fe content x (0 $\leqslant$ x $\leqslant$ 1.2). The films were deposited heteroepitaxially on MgO single crystal…
We exploit the intrinsic structural instability of the Fe70Pd30 magnetic shape memory alloy to obtain functional epitaxial films exhibiting a self-organized nanostructure. We demonstrate that coherent epitaxial straining by 54% is possible.…
Magnetic transition metal dichalcogenide (TMD) films have recently emerged as promising candidates to host novel magnetic phases relevant to next-generation spintronic devices. However, systematic control of the magnetization orientation,…
In the paper we present the results of extensive studies of palladium-rich Pd1-xFex alloy films epitaxially grown on MgO single-crystal substrate. In a composition range of x = 0.01-0.07 these materials are soft ferromagnets, the saturation…
Temperature dependent magnetometry and transport measurements on epitaxial Fe3O4 films grown on BaTiO3(100) single crystals by molecular beam epitaxy show a series of discontinuities, that are due to changes in the magnetic anisotropy…
Nanoscale layered ferromagnets have demonstrated fascinating two-dimensional magnetism down to atomic layers, providing a peculiar playground of spin orders for investigating fundamental physics and spintronic applications. However,…
We present optimization of [(15 $\unicode{x212B}$) Ni$_{80}$Fe$_{20}$/(5 $\unicode{xC5}$) M]$_{20}$ single crystal multilayers on (001) MgO, with M being Cu, Cu$_{50}$Pt$_{50}$ and Pt. These superlattices were characterized by…
The suitability of a particular material for use in magnetic devices is determined by the process of magnetization reversal/relaxation, which in turn depends on the magnetic anisotropy. Therefore, designing new ways to control magnetic…
Huge deformations of the crystal lattice can be achieved in materials with inherent structural instability by epitaxial straining. By coherent growth on seven different substrates the in-plane lattice constants of 50 nm thick Fe70Pd30 films…
We demonstrate by means of fully relativistic first principles calculations that, by substitution of Fe by Cr, Mn, Co, Ni or Cu in FePt-L10 bulk alloys, with fixed Pt content, it is possible to tune the magnetocrystalline anisotropy energy…
A few theoretical models predict Fe to display both ferromagnetic and antiferromagnetic phases, depending on the volume of the unit cell. A proper choice of the substrate allows the growth of thin Fe overlayers with structures different…
The large magnetostriction in FeGa alloys is relevant for manifold applications, but for thin films, it can play a prominent role in controlling the strength of the magnetic anisotropy. Bulk samples show values depending on the extensive…
Antiferromagnetic materials are of great interest for spintronics. Here we present a comprehensive study of the growth, structural characterization, and resulting magnetic properties of thin films of the non-collinear antiferromagnet…
We present an investigation of the magnetic behavior of epitaxial MnAs films grown on GaAs(100). We address the dependence of the magnetic moment, ferromagnetic transition temperature ($T_c$) and magnetocrystalline anisotropy constants on…
Rare earth free alloys are in focus of permanent magnet research since the accessibility of the elements needed for nowadays conventional magnets is limited. Tetragonally strained iron-cobalt (Fe-Co) has attracted large interest as…
We performed resistance measurements on Fe$_{1+\delta-x}$Cu$_{x}$Te with $x_{EDX}\leq 0.06$ in the presence of in-plane applied magnetic fields, revealing a resistance anisotropy that can be induced at a temperature far below the structural…
The magnetization (M) as a function of temperature (T) from 2 to 300 K and in-plane field (H) up to 1 kOe, room temperature easy and hard direction in-plane field hysteresis loops for fields between -100 and +100 Oe, and 10 GHz…
A detailed study of the electronic transport and magnetic properties of Fe$_{1-x}$Cu$_x$Cr$_2$S$_4$ ($x \leq 0.5$) on single crystals is presented. The resistivity is investigated for $2 \leq T \leq 300$ K in magnetic fields up to 14 Tesla…
Electronic structure calculations are used to examine the magnetic properties of Fe$_2$P-based alloys and the mechanisms through which the Curie temperature and magnetocrystalline anisotropy can be optimized for specific applications. It is…