Related papers: Design of an efficient Mid-IR light source using A…
Mid-infrared saturable absorber mirror is successfully fabricated by transferring the mechanically exfoliated black phosphorus onto the gold-coated mirror. With the as-prepared black phosphorus saturable absorber mirror, a continuous-wave…
In this study, we revealed the impact of the pumping scheme, fiber length, pumping power, and reflectivity of the output fiber Bragg grating on the performance of a Tm^3+ -doped fiber laser (TDFL) operating at a wavelength of 1.72 \mu m.…
We propose to use high numerical aperture single mode optical fibers like photonic crystal fiber for lensless in-line holographic microscopy. Highly divergent beam helps to overcome the spatial sampling limitation of the image sensor. In…
We present a simple and compact approach of structured illumination microscopy by using three $2\times2$ fiber couplers and one $1\times4$ MEMS optics switch. One uniform and three fringe illumination patterns were produced by placing seven…
We present a narrow linewidth continuous laser source with over 11 Watts of output power at 780nm, based on single-pass frequency doubling of an amplified 1560nm fibre laser with 36% efficiency. This source offers a combination of high…
We present the realization of mid-infrared waveguide by ultrafast laser inscription technique in a chalcogenide glass. Our approach is based on multicore waveguide that consists in an alignment on a mesh of positive refractive index…
We present theoretical and experimental evidence of high-gain far-detuned nonlinear frequency conversion, extending towards both the visible and the mid-infrared, in a few-mode graded-index silica fiber pumped at 1.064 $\mu$m, and more…
This study reports the successful fabrication of high-positive refractive index change waveguides, exceeding 0.02 in fluoride glasses, marking a significant advancement in integrated optical components for visible to mid-infrared…
Nonlinear frequency conversion provides essential tools for light generation, photon entanglement, and manipulation. Transition metal dichalcogenides (TMDs) possess huge nonlinear susceptibilities and 3R-stacked TMD crystals further combine…
We report on the development of a high-power mid-infrared frequency comb with 100 MHz repetition rate and 100 fs pulse duration. Difference frequency generation is realized between two branches derived from an Er:fiber comb, amplified…
Mid-infrared frequency comb spectroscopy enables measurement of molecular at megahertz spectral resolution, sub-hertz frequency accuracy and microsecond acquisition speed. However, the widespread adoption of this technique has been hindered…
We propose a scheme to enhance the effective photonic bandwidth exploiting bandgap overlapping of same order or different orders through judiciously chosen aperiodic geometries is spatial dimension. To implement the scheme, we design a…
We demonstrate that absorption saturation of a mid-infrared intersubband transition can be engineered to occur at moderate light intensities of the order of 10-20 kW$.$cm$^{-2}$ and at room temperature. The structure consists of an array of…
The performance of mid-infrared erbium doped fiber lasers has dramatically improved in the last few years. In this paper we present a numerical model that provides valuable insight into the dynamics of a dual-wavelength pumped fiber laser…
Light-emitting diodes (LEDs) can bridge the gap between narrow linewidth, expensive lasers and broadband, inefficient thermal globars for low-cost chemical sensing in the mid-infrared (mid-IR). However, the efficiency of III-V based mid-IR…
We experimentally demonstrate a simple configuration for mid-infrared (MIR) frequency comb generation in quasi-phase-matched lithium niobate waveguides using the cascaded-$\chi^{(2)}$ nonlinearity. With nanojoule-scale pulses from an…
Lab-on-a-Chip (LoC) devices combining microfluidic analyte provision with integrated optical analysis are highly desirable for several applications in biological oder medical sciences. While the microfluidic approach is already broadly…
A pure silica photonic crystal fiber with a group velocity dispersion ($\beta_2$) of 4 ps$^2$/km at 1.55 $\mu$m and less than 7 ps$^2$/km from 1.32 $\mu$m to the zero dispersion wavelength (ZDW) 1.80 $\mu$m was designed and fabricated. The…
Supercontinuum generation is performed in the bulk semiconductor tellurium (Te) with a high-power picosecond CO$_2$ laser at peak intensities up to 20 GW/cm$^2$. The spectrum spans from the second harmonic of the pump at 5.3 $\mu$m to 32…
We report on a long wavelength emitting rare earth doped fiber laser with emission centered at 3.5 {\mu}m and tunable across 450 nm. The longest wavelength emission was 3.78 {\mu}m, which is the longest emission from a fiber laser operating…