Related papers: Titania Prepared by Ball Milling: Its Characteriza…
We fabricate and compare nanocomposite thin-film ZnO chemoresistive acetone sensors with gold or palladium nanoparticles on the surface, at low operating temperatures. The sensors are fabricated by pulsed laser deposition and operate in the…
Low resistivity (~3-24 mOhm.cm) with tunable n- and p-type phase pure Cu2O thin films have been grown by pulsed laser deposition at 25-200 0C by varying the background oxygen partial pressure (O2pp). Capacitance data obtained by…
Ultrathin microscale resistive thermometers are of key value to many applications. Here we have fabricated a laser machined 50 ${\mu}$m wide and 50 nm thick serpentine Pt thin film sensor capable of sensing temperatures up to 650 ${^\circ}$…
A light emitting diode (LED) pulser has been developed that can be used for tests or calibration of timing and amplitude sensitivity of particle physics detectors. A comparative study is performed on the components and pulser output…
Bismaleimide (BMI) resin/ titania nanocomposites were synthesized from allylated-phenolic modified bismaleimide resin and TiO2 via the sol-gel process of tetrabutyltitanate (Ti(OnBu)4, TBT). These nanocomposite materials were characterized…
A new method is presented to manufacture piezoresistive tactile sensors using fused deposition modelling (FDM)printing technology with two different filaments made of thermoplastic polyurethane (TPU) and polylactic acid-graphene (PLA-G)…
The polarisation of prompt $\psi(2S)$ mesons is measured by performing an angular analysis of $\psi(2S)\rightarrow \mu^{+} \mu^{-}$ decays using proton-proton collision data, corresponding to an integrated luminosity of 1.0 fb$^{-1}$,…
We have studied solid hydrogen under pressure at low temperatures. With increasing pressure we observe changes in the sample, going from transparent, to black, to a reflective metal, the latter studied at a pressure of 495 GPa. We have…
Chemiresistive gas sensors transduce gas adsorption into changes in the electrical resistance across a pair of electrodes connected by a sensitive layer of material. This type of sensor is used due to its simple operation, high sensitivity,…
The recent detection of gas-phase methanol (CH$_3$OH) lines in the disc of TW Hya by Walsh et al. provided the first observational constraints on the complex O-bearing organic content in protoplanetary discs. The emission has a ring-like…
Hydrogen sensors have been prepared using nickel oxide (NiO) and lithium-doped nickel oxide (NiO:Li) thin films, deposited on glass substrates by the sol-gel spin coating technique. The surface morphology, structure, optical and electrical…
The observation of plasma focusing of a 28.5 GeV positron beam is reported. The plasma was formed by ionizing a nitrogen jet only 3 mm thick. Simultaneous focusing in both transverse dimensions was observed with effective focusing strengths…
MgB2 monofilamentary nickel-sheated tapes and wires were fabricated by means of the ex-situ powder-in-tube method using either high-energy ball milled and low temperature synthesized powders. All sample were sintered at 920 C in Ar flow.…
This paper describes the construction and optimization of a Langmuir-Taylor detector for lithium, using a rhenium ribbon. The absolute detection probability of this very sensitive detector is measured and the dependence of this probability…
We present a study on the crystallization process of undoped and Ta doped TiO2 amorphous thin films. In particular, the effect of ultra-fast annealing treatments in environments characterized by different oxygen concentrations is…
Magnesium diboride bulk pellets were fabricated from pre-reacted MgB2 powder ball milled with different amounts of exposure to air. Evidence of increased electron scattering including increased resistivity, depressed Tc, and enhanced Hc2 of…
To investigate excess-hydrolysis of titanium alkoxides, TiO2 powders were fabricated from titanium-tetra-isopropoxide using 6:1 and 100:1 H2O:Ti (r) ratios. Powders were dried and fired at a range of temperatures ( up to 800 C).…
In this work we study the optoelectronic properties of individual TiO2 fibres produced through coupled sol-gel and electrospinning, by depositing them onto pre-patterned Ti/Au electrodes on SiO2/Si substrates. Transport measurements in the…
Laser-plasma proton acceleration was investigated in the Target Normal Sheath Acceleration (TNSA) regime using a novel gas-foil target. The target is designed for reaching higher laser intensity at the foil plane owing to relativistic…
Plasma diagnostics have a shortage of fast and sensitive calorimetric sensors that can track substrate temperature during plasma-assisted microfabrication. In this work, energy fluxes from argon and oxygen radiofrequency (RF) glow…