Related papers: Structural relationships among monoclinic and hexa…
Intermetallic precipitates formed in heat-treated and aged Mg-Zn and Mg-Zn-Y alloys have been investigated via electron microscopy. Coarse spheroidal precipitates formed on deformation twin boundaries contained domains belonging to either…
Precipitation in Mg-Zn alloys was analyzed by means of first principles calculations. Formation energies of symmetrically distinct hcp Mg1-xZnx (0 < x < 1) configurations were determined and potential candidates for Guinier-Preston zones…
While lean Mg-Zn-Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca. In this context, the precipitation in Mg-1.5Zn-0.25Ca (ZX20, in wt.%) was investigated upon linear heating from about…
The composition, crystal structure and precipitation crystallography of a newly found precipitate are characterized by a Cs-corrected scanning transmission electron microscopy (STEM). The composition of the plate-like precipitate could be…
Precipitation on deformation defects is essential for enhancing mechanical properties of age-hardenable alloys. {10-12} twinning is common in deformed alloys with hexagonal-close-packed structure. In this work, we revealed how {10-12} twin…
The precipitation microstructure of the \gamma' (AlAg2) intermetallic phase has been examined in aluminium-silver-copper alloys. The microstructure developed in an Al-0.90at.%Ag-0.90at.%Cu alloy was significantly different from that…
We report on a quantitative investigation into the effect of size and distribution of rod-shaped \beta' precipitates on strength and ductility of a Mg-Zn alloy. Despite precipitation strengthening being crucial for the practical application…
The effect of pre-ageing deformation on the size and distribution of beta-prime precipitates and subsequently on the resulting strength and ductility have been measured in a Mg-3.0at.%Zn-0.5at.%Y alloy. The alloy was extruded and then…
The interaction between Mg edge basal dislocations and rod-shaped $\beta_1'$-MgZn$_2$ precipitates was studied by atomistic simulations using a new interatomic potential. The atomistic model was carefully built taking into account the…
Microstructural analysis of a Mg-Zn alloy deformed at room temperature by high-pressure torsion (HPT) indicates that fine-scale precipitation occurs even without post-deformation heat treatment. Small-angle X-ray scattering detects…
The mechanical properties of Mg-4wt.% Zn alloy single crystals along the [0001] orientation were measured through micropillar compression at 23C and 100C. Basal slip was dominant in the solution treated alloy, while pyramidal slip occurred…
We discover the detailed atomic structure of $d$-MgZnY, a stable decagonal quasicrystal alloy of the layered Frank-Kasper type, and related phases, using the "tiling and decoration" approach. The atoms have invariable sites in the rectangle…
The mechanisms of dislocation/precipitate interaction as well as the critical resolved shear stress were determined as a function of temperature in a Mg-4 wt. % Zn alloy by means of micropillar compression tests. It was found that the…
A series of structural polytypes formed in an Mg-1at.%Zn-2at.%Y alloy has been identified, which are reasonably viewed as long-period stacking derivatives of the hcp Mg structure with alternate AB stacking of the close-packed atomic layers.…
This work presents a detailed investigation into the effect of a low Cu addition (0.01 at.%) on precipitation in an Al-0.80Mg-0.85Si alloy during ageing. The precipitate crystal structures were assessed by scanning transmission electron…
Here we describe the results of an atomic resolution study of oxygen incorporation into bulk MgB2. We find that ~20-100 nm sized precipitates are formed by ordered substitution of oxygen atoms onto boron lattice sites, while the basic bulk…
Although magnesium alloys deform extensively through shear strains and crystallographic re-orientations associated with the growth of twins, little is known about the strengthening mechanisms associated with this deformation mode. A crystal…
Precipitation hardening, which relies on a high density of intermetallic precipitates, is a commonly utilized technique for strengthening structural alloys. Structural alloys are commonly strengthened through a high density of small size…
To understand the formation of the Bergman cluster in the F-type icosahedral quasicrystal, crystallographic relations between the quasicrystal and the intermetallic-compound H and Zn$_{23}$Y$_6$ phases in the Zn-Mg-Y alloy system were…
We propose structure models of the unique long-period stacking/order (LPSO) phases formed in the Mg-Zn-RE alloys, based on Z-contrast scanning transmission electron microscopy (STEM) observations and first-principles calculations. The LPSO…