Related papers: Tin Pest: A Forgotten Issue in the Field of Applie…
In this work we present an experimental study of structure and phase stability in ternary Cu-Sn-In alloys around 55 at.% Cu in the temperature range 100^{\circ}C < T < 550^{\circ}C. We have followed in real-time the sequence of phase…
In recent years, lead-free solder alloys based on tin, silver, or copper have gained popularity over lead-based solder alloys due to their improved mechanical and electrical properties and their non-toxic nature. In our previous studies, we…
Beta-tin has been used widely as an interconnect in modern electronics. To improve the understanding of the reliability of these components, we directly measure the critical resolved shear stress of individual slip systems in beta-tin using…
The influence of solute atoms (Al and Zn) on the deformation mechanisms and the critical resolved shear stress for basal slip in Mg alloys at 298 K and 373 K was ascertained by micropillar compression tests in combination with…
Resistivity and thermoelectric power (TEP) measurements on CeFe$_2$ and two of its pseudo-binaries Ce(Fe, 5% Ir)$_2$ and Ce(Fe, 7% Ru)$_2$ between 78K and 275K are reported. The resistivity data are analysed in terms of contributions from…
Solders with superconducting properties around $4\,{\rm K}$ are useful in low magnetic field environments for AC current leads or in electrical and mechanical bonds. Accurate knowledge of these properties are needed in high precision…
The creep behaviour and microstructural evolution of a Sn-3Ag-0.5Cu wt.% sample with a columnar microstructure have been investigated through in-situ creep testing under constant stress of 30 MPa at 298 K. This is important, as 298 K is…
The "metallic" temperature variation of the electrical resistivity of chemical nano gold-silver coatings with a silver content of 6.6 % at. up to 13.1 % at. determined in the temperature range 4.2-300 K. Features of low-temperature…
At ambient pressure tin transforms from its ground-state semi-metal $\alpha$-Sn (diamond structure) phase to the compact metallic $\beta$-Sn phase at 13$^\circ$C (286K). There may be a further transition to the simple hexagonal $\gamma$-Sn…
We report resonant ultrasound spectroscopy (RUS), dilatometry/magnetostriction, magnetotransport, magnetization, specific heat, and $^{119}$Sn M\"ossbauer spectroscopy measurements on SnTe and Sn$_{0.995}$Cr$_{0.005}$Te. Hall measurements…
The critical resolved shear stress of an Al 4 wt. \% Cu alloy containing a homogeneous distribution of $\theta''$ precipitates was determined by means of dislocation dynamics simulations. The size distribution, shape, orientation and volume…
We studied Zn-substitution effect on the high-T_c superconductors, underdoped La_{2-x}Sr_xCu_{1-y}Zn_yO_4 (x=0.10; y=0, 0.01, 0.02), optimally doped (x=0.15; y=0, 0.02), and overdoped (x=0.20; y=0, 0.03, 0.06) in a temperature range of…
The ferroelectric degenerate semiconductor Sn$_{1-\delta}$Te exhibits superconductivity with critical temperatures, $T_c$, of up to 0.3 K for hole densities of order 10$^{21}$ cm$^{-3}$. When doped on the tin site with greater than $x_c$ $=…
In novel Co and CoNi based superalloys, the creep resistance is limited at high temperatures due to low lattice misfit and solvus temperature. In this study, we combined the advantages of Co-Ti (high lattice misfit and solvus temperature)…
The results of investigations of the corrosion resistance of Al-Mg-Sc-Zr alloys with varying Mg content and different Sc/Zr ratios are presented. The objects of investigations were the Al-Mg-Sc-Zr alloys with total Sc + Zr content of 0.32…
The influence of Sn alloying additions on the aqueous passivation behavior of Cu-Al alloys was revisited and found to function as a new third element effect in acidified 0.1 M Na2SO4 solution. The role of each element during the process of…
High strength 7xxx Al-alloys are currently commonly used in aerospace and are expected to be increasingly employed in the automotive sector for weight reduction purposes. These alloys can however be sensitive to stress-corrosion cracking…
Increasing attention is being paid to $\alpha$$_2$ Ti$_3$(Al,Sn) precipitation from the $\alpha$ phase of titanium alloys owing to its effect on slip band formation, localisation and the implications for fatigue performance in jet engine…
The investigation of the deformation behaviour of intermetallic phases is mostly limited to high temperatures due to their low ductility at ambient temperature. Therefore, within this study, nanoindentation experiments on the Al$_{2}$Cu…
A weakening of superconductivity upon substitution of Cu by Zn (0.5~1 %) is observed in a high-T_c cuprate, Ca_{2-x}Na_xCuO2Cl2, near the hole concentration of 1/8 per Cu. The superconducting transition temperature and its volume fraction,…