Related papers: New resonant cavity-enhanced absorber structures f…
Optical cavities are a cornerstone of photonics. They are indispensable in lasers, optical filters, optical combs and clocks, in quantum physics, and have enabled the detection of gravitational waves. Cavities transmit light only at…
The achievable instrument sensitivity is a critical parameter for the continued development of THz applications. Techniques such as Cavity-Enhanced Techniques and Cavity Ring Down Spectroscopy have not yet been employed at THz frequency due…
We present a simple, continuous, cavity-enhanced optical absorption measurement technique based on high-bandwidth Pound-Drever-Hall (PDH) sideband locking. The technique provides a resonant amplitude quadrature readout that can be mapped…
Analysis of the properties of resonant modes in a reentrant cavity structure comprising of a post and a ring was undertaken and verified experimentally. In particular we show the existence of higher order reentrant cavity modes in such a…
High-finesse microcavities offer a platform for compact, high-precision sensing by employing high-reflectivity, low-loss mirrors to create effective optical path lengths that are orders of magnitude larger than the device geometry. Here, we…
We present a scheme to strongly enhance the readout sensitivity of the squared displacement of a mobile scatterer placed in a Fabry-P\'erot cavity. We investigate the largely unexplored regime of cavity electrodynamics in which a highly…
Coupling an emitter to a Fabry-P\'{e}rot optical cavity can provide a coherent and strong light-matter interface whose performance in a variety of applications depends critically on the emitter-photon coupling strength. Altering the…
The monolithic integration of novel nanomaterials with mature and established technologies has considerably widened the scope and potential of nanophotonics. For example, the integration of single semiconductor quantum dots into photonic…
Optical cavities with both optimized resonant conditions and high quality factors are important metrological tools. In particular, they are used for laser gravitational wave (GW) detectors. It is necessary to suppress the parametric…
We present a new micromechanical resonator designed for cavity optomechanics. We have used a micropillar geometry to obtain a high-frequency mechanical resonance with a low effective mass and a very high quality factor. We have coated a…
A class of multiwavelength Fabry-Perot lasers is introduced where the spectrum is tailored through a non-periodic patterning of the cavity effective index. The cavity geometry is obtained using an inverse scattering approach and can be…
Nearly concentric optical cavities can be used to prepare optical fields with a very small mode volume. We implement an anaclastic design of a such a cavity that significantly simplifies mode matching to the fundamental cavity mode. The…
By extracting the permittivity of monolayer MoS2 from experiments, the optical absorption of monolayer MoS2 prepared on top of one-dimensional photonic crystal (1DPC) or metal films is investigated theoretically. The 1DPC and metal films…
Fundamental sensitivity of an optical interferometric gravitational wave detector increases with increase of the optical power which, in turn, limited because of the opto-mechanical parametric instabilities of the interferometer. We propose…
Fiber Fabry--Perot (FFP) resonators of a few centimeters are optimized as a function of the reflectivity of the mirrors and the dimensions of the intra-cavity waveguide. Loaded quality factor in excess of 10^9, with an optimum of…
A resonant-cavity enhanced detector operating in the mid-infrared at a wavelength around 3.6 micron is demonstrated. The device is based on a narrow-gap lead salt heterostructure grown by molecular beam epitaxy. Below 140 K, the…
We report on the realization of an optical microcavity consisting in the plane-plane arrangement of two suspended resonant mirrors possessing spectrally overlapping high-quality factor internal resonances. We first investigate its generic…
In this study, we theoretically and numerically investigate the resonant modes and reflectance of an optical grating consisting of a wavy dielectric slab by applying the spectral element method. The presence of the wavy shape transforms the…
We report a novel hemispherical micro-cavity that is comprised of a planar integrated semiconductor distributed Bragg reflector (DBR) mirror, and an external, concave micro-mirror having a radius of curvature $50\mathrm{\mu m}$. The…
As millimeter-wave cosmology experiments refine their optical chains, precisely characterizing their optical materials under cryogenic conditions becomes increasingly important. For instance, as the aperture sizes and bandwidths of…