Related papers: High-speed measurement of firearm primer blast wav…
This article describes a method and results for direct high-speed measurements of rifle primer blast waves employing a high-speed pressure transducer located at the muzzle to record the blast pressure wave produced by primer ignition. Our…
Results are presented for lead free primers based on diazodinitrophenol (DDNP)compared with tests on lead styphnate based primers. First, barrel friction measurements in 5.56 mm NATO are presented. Second, shot to shot variations in blast…
This article presents a set of acoustic measurements conducted on the Statoil funded Behind Casing Logging Set-Up, designed by SINTEF Petroleum Research to resemble an oil well casing. A set of simple simulations using COMSOL Multiphysics…
Shock tubes create simulated blast waves which can be directed and measured to study blast wave effects under laboratory conditions. It is desirable to increase available peak pressure from ~1 MPa to ~5 MPa to simulate closer blast sources…
The pressure wave emitted from the air gun contains many frequencies, among which the low-frequency waves are desirable for exploration and imaging, while the high-frequency waves need to be suppressed as they are harmful to marine species.…
Shock tubes simulate blast waves to study their effects in air under laboratory conditions; however, few experimental models exist for simulating underwater blast waves that are needed for facilitating experiments in underwater blast…
Data on the observation of neutron bursts in the process of high-voltage discharge in the air at an average electric field strength ~ 1 MV/m and discharge current ~ 10 kA are presented. Two independent methods (CR-39 track detectors and…
Aim. We investigate synthetic observational signatures generated from numerical models of transverse waves propagating in braided magnetic fields. Methods. We examine two simulations with different levels of magnetic field braiding and…
A glow nanosecond discharge from a plane-to-plane impulse dielectric barrier discharge (iDBD) with ammonia gas has been characterised by employing fast imaging and electrical diagnostics. More precisely, the aim of this study is to…
We present the first measurements of the muon-induced neutron flux at the Boulby Underground Laboratory. The experiment was carried out with an 0.73 tonne liquid scintillator that also served as an anticoincidence system for the ZEPLIN-II…
This paper describes the first experimental demonstration of the guiding of a relativistic electron beam in a solid target using two co-linear, relativistically intense, picosecond laser pulses. The first pulse creates a magnetic field…
We present a real-time differential phasefront detector sensitive to better than 3 mrad rms, which corresponds to a precision of about 500 pm. This detector performs a spatially resolving measurement of the phasefront of a heterodyne…
The Doppler effect, the shift in the frequency of sound due to motion, is present in both classical gases and quantum superfluids. Here, we perform an in-situ, minimally destructive measurement, of the persistent current in a ring-shaped,…
Position-meter and speed-meter interferometers have been analysed for detecting gravitational waves. We introduce the concept of acceleration measurement in comparison with position and speed measurement. In this paper, we describe a…
A novel method is presented for measuring impulsive forces generated by devices which are fed with medium power microwave signals. The forces are measured with a torsion balance or weighing scale, as usual, but the microwave signal is…
This article describes two acoustic methods to measure bullet velocity with an accuracy of 1% or better. In one method, a microphone is placed within 0.1 m of the gun muzzle and a bullet is fired at a steel target 45 m away. The bullet's…
An experimental investigation was carried out to study heat transfer rates in a high-temperature, high-pressure region generated using the shock focusing technique. A shock tube test facility with a specially designed spherically converging…
We have built a high-accuracy wavelength meter for tunable lasers using a scanning Michelson interferometer and a reference laser of known wavelength. The reference laser is a frequency stabilized diode laser locked to an atomic transition…
Resolving fluid transport at engine surfaces is required to predict transient heat loss, which is becoming increasingly important for the development of high-efficiency internal combustion engines (ICE). The limited number of available…
Laser speckle can provide a powerful tool that may be used for metrology, for example measurements of the incident laser wavelength with a resolution beyond that which may be achieved in a commercial device. However, to realise highest…