Related papers: Vacuum Pressure Measurements using a Magneto-Optic…
We present a simple, reliable, and no-destructive method for the measurement of vacuum pressure in a magneto-optical trap. The vacuum pressure is verified to be proportional to collision rate constant between cold atoms and background gas…
The lifetime of an atom trap is often limited by the presence of residual background gases in the vacuum chamber. This leads to the lifetime being inversely proportional to the pressure. Here we use this dependence to estimate the pressure…
Magneto-optical traps are central to atomic and molecular quantum technologies and precision tests of fundamental physics, where both sensitivity and bandwidth scale strongly with atom number and loading rate. We demonstrate that employing…
We have developed a compact setup which enables loading a magneto-optical trap (MOT) in ultra-high vacuum (UHV) environment. Nearly $1 \times 10^{8}$ atoms of $^{87}Rb$ are trapped in the MOT at $\sim 2 \times 10^{-10}$ Torr base pressure…
Magneto-Optical Traps have been used for several decades. Among fundamental mechanisms occuring in such traps, the magnitude of the multiple scattering is still unclear. Indeed, many experimental situations cannot be modeled easily,…
Experiments using laser cooled atoms and ions show real promise for practical applications in quantum- enhanced metrology, timing, navigation, and sensing as well as exotic roles in quantum computing, networking and simulation. The heart of…
We report on an investigation of loading characteristics of deep microscopic dipole traps. The dipole trap is loaded from a low density magneto optical trap (MOT) containing $\approx 5\times 10^{6}$ atoms. We determine the loading…
In this work, we have measured the background pressure in an ultra-high vacuum (UHV) chamber by measuring the collisional loss rates in a Rb atom magneto-optical trap (MOT) on an atom chip. The loss rate due to non-Rb gases in the…
We demonstrate a novel way to form and deplete a vapor-cell magneto-optic trap (MOT) using a reversible, solid-state alkali-metal source (AMS) via an applied polarized voltage. Using ~100 mW of electrical power, a trapped-atom number of…
We describe and characterize a device for alkali vapor pressure modulation on the 100ms timescale in a single-cell cold atom experiment. Its mechanism is based on optimized heat conduction between a current-modulated alkali dispenser and a…
This study presents investigations on pulsed loading of a magneto-optical trap (MOT) on an atom chip in an UHV environment. Using three parallel resistively heated Rb-metal dispensers activated by pulsed current supply, approximately 3.0…
We study the dynamics of a magneto-optical trap (MOT) operating at high-bandwidth. We find the absolute importance of high recapture efficiency between cycles to maintain a practical atom number. We develop a simple model accounting for MOT…
Measurements with low Z targets at internal experiments typically imply a gas load which deteriorates the ring vacuum. Future experiments need reliable estimates for the expected vacuum conditions in order to design 4-pi detectors closely…
Nanoparticles levitated by optical fields under vacuum conditions have applications in quantum science, the study of nanothermodynamics and precision sensing. Existing techniques for loading optical traps require ambient conditions, and…
We have studied the accuracy of the atomic microwave power standard. The atoms are cooled and kept in a Magneto-Optical Trap (MOT), then dropped through a terminated transmission line (a rectangular, R-70 type, waveguide). The measurement…
We have developed an improved scheme for loading atoms into a magneto-optical trap (MOT) from a directed alkali metal dispenser in < 10^-10 torr ultra-high vacuum conditions. A current-driven dispenser was surrounded with a cold absorbing…
We present an all-optical method to measure and compensate for residual magnetic fields present in a cloud of ultracold atoms trapped in an optical dipole trap. Our approach leverages the increased loss from the trapped atomic sample…
Total pressure gauges are used to measure the level of vacuum in a system independent of the gas species. Partial pressure analysers measure the occurrence of each gas species separately. This report explains the methodology of measurement,…
We present a method to measure the optical torque applied to particles of arbitrary shape held in an optical trap, inferred from the change of angular momentum of light induced by the particle. All torque components can be determined from a…
We present the design and vacuum performance of a compact room-temperature trapped ion system for quantum computing, consisting of a ultra-high vacuum (UHV) package, a micro-fabricated surface trap and a small form-factor ion pump. The…