Related papers: A Test of HTS Power Cable in a Sweeping Magnetic F…
Design, fabrication and assembly of a novel fast-cycling accelerator magnet is presented. A short-sample magnet is powered with a single-turn HTS cable capable to carry 80 kA current at 20 K and generate 1.75 T field in a 40 mm magnet gap.…
The optimization of a HTS cable design with respect to AC-losses is of crucial importance for the economic viability of the respective concept. However the experimental determination of AC-losses is not straightforward since for short cable…
The Twisted Stacked-Tape Cable (TSTC) is one of the major high temperature superconductor cable concepts combining scalability, ease of fabrication and high current density making it a possible candidate as conductor for large scale…
We report very low temperature magnetoconductance DeltaG measurements on graphene devices with the magnetic field H applied parallel to the carbon sheet. The DeltaG(H) signal depends on the gate voltage Vg and its sign is related with the…
With the recent progresses on the designing and manufacturing of lightweight and high engineering current density superconducting cables, the need for an established, fast, and sufficiently accurate computational model for the forecasting…
A compact HTS cable that is able to carry large current density is crucial for developing high field accelerator magnets. We are reporting a novel HTS cable (named X-cable) that could achieve a high current density as the Roebel cable, but…
Magnetic design proposed for a damping ring (DR) is based on second generation HTS cabling technology applied to the DC windings with a yoke and mu-metal-shimmed pole to achieve ~2T high-quality field within a 86 mm gap and 32-40 cm period.…
Power cables have complex geometries in order to reduce their ac resistance. Although there are many different cable designs, most have in common that their inner conductors' cross-section is divided into several electrically insulated…
Roebel cables made of HTS coated conductors are regarded as promising cables for winding applications in virtue of their large engineering current density and low losses. The composing meander-shaped strands are assembled very tightly into…
Roebel cables made of HTS coated conductors can carry high currents with a compact design and reduced AC losses. They are therefore good candidates for manufacturing coils for HTS applications such as motors and generators. In this paper we…
This paper presents a design concept of an HTS/LTS hybrid dipole with 50 mm aperture and 20 T nominal field based on a cos-theta coil and a cold iron yoke. The HTS part of magnet coil uses REBCO Twisted Stacked Tape cable. The LTS part is…
This paper presents the alternating current (AC) loss analysis on high-temperature superconductor (HTS) Cross-Conductor (CroCo) cables, in order to evaluate whether they could be utilized for electrical power transmission. The modeling of…
Different magnet applications require compact high current cables. Among the proposed solutions, the Twisted Stacked Tape Cable (TSTC) is easy to manufacture and has very high tape length usage efficiency. In this kind of cables the tapes…
Magnetization loss on a twisted superconducting (SC) tape in a ramped magnetic field is theoretically investigated through the use of a power law for the electric field--current density characteristics and a sheet current approximation.…
Minimization of ac losses is essential for economic operation of high-temperature superconductor (HTS) ac power cables. A favorable configuration for the phase conductor of such cables has two counter-wound layers of HTS tape-shaped wires…
Experimental studies of the electric and heat currents in the normal, superconducting and mixed states of high T$_c$ superconductors (HTcS) lead to characterization, complementary to data obtained from equilibrium property based techniques.…
Measurements of AC losses in a HTS-tape placed in between of two bulk magnetic shields of high permeability were performed by applying calorimetric techniques for various asymmetrical shielding arrangements. The experiment was supported by…
Power cables have complex geometries in order to reduce their AC resistance. The cross-section of a cable consists of several conductors that are electrically insulated from each other to counteract the current displacement caused by the…
Low AC loss high transport current HTS cables (>1 kA) are required for application in transformers, generators and are considered for future generations of fusion reactors coils. 2G coated conductors are suitable candidates for high field…
There were designed and successfully tested at Fermilab several high temperature superconducting (HTS) model magnets for particle accelerators. Some of them worked in a persistent current mode continuously generating magnetic field in the…