Related papers: A sub-40 mHz linewidth laser based on a silicon si…
We demonstrate a simple, compact, and cost-effective laser noise reduction method for stabilizing an extended cavity diode laser to a 3x105 finesse mirror Fabry-P\'erot (F-P) cavity corresponding to resonance linewidth of 10 kHz using a…
Using one arm of the Michelson interferometer and the power recycling mirror of the interferometric gravitational wave detector GEO600, we created a Fabry-Perot cavity with a length of 1200 m. The main purpose of this experiment was to…
We have developed an ultra-stable source in the deep ultraviolet, suitable to fulfill the interrogation requirements of a future fully-operational lattice clock based on neutral mercury. At the core of the system is a Fabry-P\'erot cavity…
This paper presents a novel method for laser frequency stabilisation in the Laser Interferometer Space Antenna (LISA) mission by locking a laser to two stable length references - the arms of the interferometer and an on-board optical…
The sensitivity of laser interferometers can be pushed into regimes that enable the direct observation of quantum behaviour of mechanical oscillators. In the past, membranes with subwavelength thickness (thin films) have been proposed as…
We theoretically and experimentally investigate relevant noise processes arising in optical fiber links, which fundamentally limit their relative stability. We derive the unsuppressed delay noise for three configurations of optical links:…
High-quality micropillar cavities were grown using molecular-beam epitaxy. Stable continuous-wave lasing at room-temperature was demonstrated for microlasers with semiconductor and hybrid output mirrors. At 300 K, single-mode lasing was…
We present a compact laser frequency stabilization method by locking a 556 nm laser to a high-precision wavelength meter. Unlike traditional schemes that rely on optical cavities or atomic references, we stabilize the laser frequency via a…
We generate squeezed state of light at 860 nm with a monolithic optical parametric oscillator. The optical parametric oscillator consists of a periodically poled KTiOPO_4 crystal, both ends of which are spherically polished and…
We investigate theoretically the influence of laser phase noise on the cooling and heating of a generic cavity optomechanical system. We derive the back-action damping and heating rates and the mechanical frequency shift of the radiation…
Quantum cascade lasers (QCLs) are semiconductor-heterostructure devices known for their emission in the mid-infrared and THz spectral regions. Due to their operating regime, their intrinsic linewidth is significantly narrower compared to…
Optical resonators are increasingly important tools in science and technology. Their applications range from laser physics, atomic clocks, molecular spectroscopy, and single-photon generation to the detection, trapping and cooling of atoms…
Ultra-stable, quasi-monochromatic laser light forms the basis for high-precision interferometric measurements, e.g. for observing gravitational waves and for time keeping with optical clocks. Optical frequency conversion enables access to…
Ultrastable lasers form the back bone of precision measurements in science and technology. Such lasers attain their stability through frequency locking to reference cavities. State-of-the-art locking performances to date had been achieved…
The thermal fluctuation of mirror surfaces is the fundamental limitation for interferometric gravitational wave (GW) detectors. Here, we experimentally demonstrate for the first time a reduction in a mirror's thermal fluctuation in a GW…
Open-access microcavities are a powerful tool to enhance light-matter interactions for solid-state quantum and nano systems and are key to advance applications in quantum technologies. For this purpose, the cavities should simultaneously…
This article reports the design, the breadboarding and the validation of an ultra-stable Cryogenic Sapphire Oscillator operated in an autonomous cryocooler. The objective of this project was to demonstrate the feasibility of a frequency…
We analyse the dynamics of a one-dimensional vertical Fabry-P\'erot cavity, where the upper mirror levitates due to intra-cavity radiation pressure force. A perturbative approach is used based around separation of timescales, which allows…
We demonstrate stable optical microcavities by counteracting the phase evolution of the cavity modes using an amorphous silicon metasurface as one of the two cavity end mirrors. Careful design allows us to limit the metasurface scattering…
We describe the short-term frequency stability characterization of external-cavity diode lasers stabilized onto the 6S$_{1/2}$-7P$_{1/2}$ transition of Cs atom at 459 nm, using a microfabricated vapor cell. The laser beatnote between two…