Related papers: Evaluating the robustness of top coatings comprisi…
The requirement for low operational voltage in electrowetting devices, met using thin dielectrics, is usually connected with serious material failure issues. Dielectric breakdown (visible as electrolysis) is frequently evident slightly…
Electrowetting on dielectric is demonstrated with a thin spin-coated fluoropolymer over an aluminum electrode. Previous efforts to use thin spin-coated dielectric layers for electrowetting have shown limited success due to defects in the…
Recent experiments by Kavousanakis et al., Langmuir, 2018 [1], showed that reversible electrowetting on superhydrophobic surfaces can be achieved by using a thick solid dielectric layer (e.g. tens of micrometers). It has also been shown,…
Low voltage electrowetting on dielectrics on substrates with thin layer of lubricating fluid to reduce contact angle hysteresis is reported here. On smooth and homogeneous solid surfaces, it is extremely difficult to reduce contact angle…
Herein, we describe a novel device configuration for double-plate electrowetting-on-dielectric system with a floating top-electrode. As conventional double-plate EWOD device requires a grounded electrode on top-plate, it will cause…
Electrowetting is a commonly used tool to manipulate sessile drops on hydrophobic surfaces. By applying an external voltage over a liquid and a dielectric-coated surface, one achieves a reduction of the macroscopic contact angles for…
Floating electrode electrowetting is caused by dc voltage applied to a liquid droplet on the Cytop surface, without electrical connection to the substrate. The effect is caused by the charge separation in the floating electrode. A…
The synthesis and texturization processes of fluorinated surfaces by means of atmospheric plasma are investigated and presented through an integrated study of both the plasma phase and the resulting material surface. Three methods enhancing…
We propose a setup enabling electron energy loss spectroscopy to determine the density of the electrons accumulated by an electro-positive dielectric in contact with a plasma. It is based on a two-layer structure inserted into a recess of…
Study of the dephasing in electronic systems is not only important for probing the nature of their ground states, but also crucial to harnessing the quantum coherence for information processing. In contrast to well-studied conventional…
The paper reports on the comparison of the wetting properties of super-hydrophobic silicon nanowires (NWs), using drop impact impalement and electrowetting (EW) experiments. A correlation between the resistance to impalement on both EW and…
The phenomenon of electrowetting, i.e., the dependence of the macroscopic contact angle of a fluid on the electrostatic potential of the substrate, is analyzed in terms of the density functional theory of wetting. It is shown that…
Condensation of water on metallic surfaces is critical for multiple energy conversion processes. Enhancement in condensation heat transfer efficiency often requires surface texturing and hydrophobicity, usually achieved through coatings, to…
In response to the growing demand for more efficient and compact refrigeration and energy conversion devices, electrocaloric poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) is among the most promising active substances.…
Silicon-based dielectric is crucial for many superconducting devices, including high-frequency transmission lines, filters, and resonators. Defects and contaminants in the amorphous dielectric and at the interfaces between the dielectric…
Plasma treatment of polymer films results in their electrical charging, which in turn gives rise to an increase in their surface energy. The process results in pronounced hydrophilization of the polymer surfaces. A phenomenological theory…
We investigate the polarization switching mechanism in ferroelectric-dielectric (FE-DE) stacks and its dependence on the dielectric thickness (TDE). We fabricate HZO-Al2O3 (FE-DE) stack and experimentally demonstrate a decrease in remnant…
Dielectric capacitors are critical components in electronics and energy storage devices. The polymer based dielectric capacitors have advantages of flexibility, fast charge and discharge, low loss, and graceful failure. Elevating the use of…
Dielectric capacitors hold a tremendous advantage for energy storage due to their fast charge/discharge times and stability in comparison to batteries and supercapacitors. A key limitation to today's dielectric capacitors, however, is the…
Charge trapping is a long-standing problem in electrowetting-on-dielectric (EWOD), causing reliability reduction and restricting its practical applications. Although this phenomenon has been investigated macroscopically, the microscopic…