Related papers: Inertially-induced secondary flow in microchannels
We report novel superlattice wave patterns at the interface of a fluid layer driven vertically. These patterns are described most naturally in terms of two interacting hexagonal sublattices. Two frequency forcing at very large aspect ratio…
Inertial microfluidics is a promising tool for many lab-on-a-chip applications. Particles in channel flows with Reynolds numbers above one undergo cross-streamline migration to a discrete set of equilibrium positions in square and…
The flow of viscoelastic fluids in porous media is encountered in many practical applications, such as in the enhanced oil recovery process or in the groundwater remediation. Once the flow rate exceeds a critical value in such flows, an…
The dynamics of dilute micron-sized spherical inertial particles in turbulent duct flows is studied by means of direct numerical simulations of the carrier phase turbulence with one-way coupled Lagrangian particles. The geometries are a…
A one-dimensional model of inertial pumping is introduced and solved. The pump is driven by a high-pressure vapor bubble generated by a microheater positioned asymmetrically in a microchannel. The bubble is approximated as a short-term…
In this work, the friction factor for steady periodically developed flow through micro-and mini-channels with periodic arrays of offset strip fins is analyzed. The friction factor is studied numerically on a unit cell of the array for…
A slender two-dimensional (2D) channel bounded by a rigid bottom surface and a slender elastic layer above deforms when a fluid flows through it. Hydrodynamic forces cause deformation at the fluid--solid interface, which in turn changes the…
Experimental measurements and numerical simulations are made on fluid flow through cross-slot devices with a range of aspect (depth:width) ratios, 0.4 < alpha < 3.87. For low Reynolds numbers Re, the flow is symmetric and a sharp boundary…
Natural cilia are hair-like microtubule-based structures that are able to move fluid at low Reynolds number through asymmetric motion. In this paper we follow a biomimetic approach to design artificial cilia lining the inner surface of…
Recent numerical analyses to optimize the design of microfluidic devices for more effective entrapment or segregation of surrogate circulating tumor cells (CTCs) from healthy cells have been reported in the literature without concurrently…
Effective field theory descriptions of surface waves on flowing fluids have tended to assume that the flow is irrotational, but this assumption is often impractical due to boundary layer friction and flow recirculation. Here we develop an…
Simulations show that when a phase-separated binary AB fluid is driven to flow past chemically patterned substrates in a microchannel, the fluid exhibits unique morphological instabilities. For the pattern studied, these instabilities give…
Using a micro particle imaging velocity technique, we resolve for the first time the three dimensionnal structure of wormlike shear banding flows in straight microchannels. The study revealed two effects, which should be generic for shear…
Oscillatory flow in confined spaces is central to understanding physiological flows and rational design of synthetic periodic-actuation based micromachines. Using theory and experiments on oscillating flows generated through a laser-induced…
Characterizing the dynamics of a cantilever in channel flow is relevant to applications ranging from snoring to energy harvesting. Aeroelastic flutter induces large oscillating amplitudes and sharp changes with frequency that impact the…
Here, we describe a simple and unique architecture of a microfluidic mixer that can mix two streams (Water and Fluorescein Isothiocyanate (FITC) buffer) with 30% efficiency. The overall mixing in this design is dominated by 1D diffusion,…
With the recent important development of microfluidic systems, miniaturization of flow devices has become a real challenge. Microchannels, however, are characterized by a large surface to volume ratio, so that surface properties strongly…
We investigate the formation and stability of a pair of identical soft capsules in channel flow under mild inertia. We employ a combination of the lattice Boltzmann, finite element and immersed boundary methods to simulate the elastic…
Drainage in porous media can be broken down into two main mechanisms: a primary piston-like displacement of the interfaces through the bulk of pore bodies and throats, and a secondary slow flow through corners and films in the wake of the…
This paper is concerned with the application of finite element methods to obtain solutions for steady fully developed second-grade flows in a curved pipe of circular cross-section and arbitrary curvature ratio, under a given axial pressure…