Related papers: Superior performance of multilayered fluoropolymer…
Thin dielectric stacks comprising a main insulating layer and a hydrophobic top coating are commonly used in low voltage electrowetting systems. However, in most cases, thin dielectrics fail to endure persistent electrowetting testing at…
Electrowetting on dielectric is demonstrated with a thin spin-coated fluoropolymer over an aluminum electrode. Previous efforts to use thin spin-coated dielectric layers for electrowetting have shown limited success due to defects in the…
In response to the growing demand for more efficient and compact refrigeration and energy conversion devices, electrocaloric poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) is among the most promising active substances.…
Electrowetting on dielectric (EWOD) has emerged as a powerful tool to electrically manipulate tiny individual droplets in a controlled manner. Despite tremendous progress over the past two decades, current EWOD operating in ambient…
Low voltage electrowetting on dielectrics on substrates with thin layer of lubricating fluid to reduce contact angle hysteresis is reported here. On smooth and homogeneous solid surfaces, it is extremely difficult to reduce contact angle…
Herein, we describe a novel device configuration for double-plate electrowetting-on-dielectric system with a floating top-electrode. As conventional double-plate EWOD device requires a grounded electrode on top-plate, it will cause…
Electrowetting is a commonly used tool to manipulate sessile drops on hydrophobic surfaces. By applying an external voltage over a liquid and a dielectric-coated surface, one achieves a reduction of the macroscopic contact angles for…
Charge trapping is a long-standing problem in electrowetting-on-dielectric (EWOD), causing reliability reduction and restricting its practical applications. Although this phenomenon has been investigated macroscopically, the microscopic…
Recent experiments by Kavousanakis et al., Langmuir, 2018 [1], showed that reversible electrowetting on superhydrophobic surfaces can be achieved by using a thick solid dielectric layer (e.g. tens of micrometers). It has also been shown,…
A droplet position sensing scheme for monitoring multiple droplets has been proposed, which gives a direct voltage output linearly proportional to droplet position in electrowetting-on-dielectric (EWOD) based devices. An extra dielectric…
The inter-connection between the elasticity of a dielectric film and the wetting of a sessile drop on the same, under an applied electrical voltage, remains unaddressed. Here, we report the electrowetting-on-dielectric (EWOD) behaviour of…
The phenomenon of electrowetting, i.e., the dependence of the macroscopic contact angle of a fluid on the electrostatic potential of the substrate, is analyzed in terms of the density functional theory of wetting. It is shown that…
Condensation of water on metallic surfaces is critical for multiple energy conversion processes. Enhancement in condensation heat transfer efficiency often requires surface texturing and hydrophobicity, usually achieved through coatings, to…
This fluid dynamics video showcases how optically induced electrowetting can be used to manipulate liquid droplets in open space and particulate phases inside the droplet. A photoconductive layer is added to a conventional…
Thin-film nanocomposites, consisting of silver nanoparticles embedded in a dielectric Teflon\textregistered AF matrix, were synthesized using vapor phase co-deposition. The electrical conductivity of these composites was measured in-situ as…
Battery electrode surfaces are generally coated with electronically insulating solid films of thickness 1-50 nm. Both electrons and Li+ can move at the electrode-surface film interface in response to the voltage, which adds complexity to…
Ferroelectrics have shown potential as a promising alternative material for future photovoltaic applications. Observance of high open circuit voltages in ferroelectric thin films, have generated considerable interest in the field of…
Plasma treatment of polymer films results in their electrical charging, which in turn gives rise to an increase in their surface energy. The process results in pronounced hydrophilization of the polymer surfaces. A phenomenological theory…
Floating electrode electrowetting is caused by dc voltage applied to a liquid droplet on the Cytop surface, without electrical connection to the substrate. The effect is caused by the charge separation in the floating electrode. A…
Using Landau-Ginzburg-Devonshire theory, we considered the impact of the flexoelectro-chemical coupling on the size effects inpolar properties and phase transitions of thin ferroelectric films with a layer of elastic defects. We…