Related papers: Superconducting Low-Inductance Undulatory Galvanom…
We describe the newest generation of the SLAC Microresonator RF (SMuRF) electronics, a warm digital control and readout system for microwave-frequency resonator-based cryogenic detector and multiplexer systems such as microwave SQUID…
The millimeter wave all-metallic accelerating structure, aimed to provide more than 100 MeV/m gradient and fed by feeding RF pulses of 20-30 ns duration, is proposed. The structure is based on a waveguide with small helical corrugation.…
We have realized a microwave quantum-limited amplifier that is directional and can therefore function without the front circulator needed in many quantum measurements. The amplification takes place in only one direction between the input…
A method is proposed to experimentally determine the effective complex permeability of split-ring resonator (SRR) arrays used in the design of metamaterials at microwave frequencies. We analyze the microwave response of a loop-gap resonator…
We propose and demonstrate subwavelength grating (SWG) metamaterial waveguides and ring resonators on a silicon nitride platform for the first time. The SWG waveguide is engineered such that a large overlap of 53% of the Bloch mode with the…
We introduce an improved microwave calibration method for use in a cryogenic environment, based on a traditional three-standard calibration, the Thru-Reflect-Line (TRL) calibration. The modified calibration method takes advantage of…
We realize tunable coupling between two superconducting transmission line resonators. The coupling is mediated by a non-hysteretic rf SQUID acting as a flux-tunable mutual inductance between the resonators. From the mode distance observed…
Spectroscopy is a powerful tool to probe physical, chemical, and biological systems. Recent advances in microfabrication have introduced novel, intriguing mesoscopic quantum systems including superconductor-semiconductor hybrid devices and…
Accurate in situ calibration of microwave attenuation and amplification-chain noise is essential for superconducting quantum circuits. We demonstrate a compact, self-calibrating cryogenic noise source based on an on-chip chromium attenuator…
A spintronic method of ultra-fast broadband microwave spectrum analysis is proposed. It uses a rapidly tuned spin torque nano-oscillator (STNO), and does not require injection locking. This method treats an STNO generating a microwave…
We demonstrated a silicon integrated microring modulator working at the 2-um waveband with an L-shaped PN junction. 15-GHz 3-dB electro-optic bandwidth and <1 Vcm modulation efficiency for 45-Gbps NRZ-OOK signaling is achieved at 1960 nm.
A low-noise amplifier (LNA) amplifies a very low-power signal without significantly degrading its signal-to-noise ratio. This paper provides the design of a linear low noise amplifier with the transistor BFP 640 using bilateral approach…
We report a two-stage, heterodyne rf-to-microwave transducer that combines a tunable electrostatic pre-amplifier with a superconducting electromechanical cavity. A metalized Si$_3$N$_4$ membrane (3 MHz frequency) forms the movable plate of…
Low-frequency resonances with low stability margins affect video bandwidth characteristics of power amplifiers. In this work, a non-connectorized measurement technique is presented to obtain the low-frequency critical poles at internal…
We present an ultrastrong superinductor-based coupling consisting of a flux qubit galvanically coupled to a resonator. The coupling inductor is fabricated in granular Aluminum, a superinductor material able to provide large surface…
Voltage-tunable superconductor-semiconductor devices offer a unique platform to realize dynamic tunability in superconducting quantum circuits. By galvanically connecting a gated InAs-Al Josephson junction to a coplanar waveguide resonator,…
We present design and simulation of a Josephson parametric amplifier with bandwidth exceeding 1.6 GHz, and with high saturation power approaching -90 dBm at a gain of 22.8 dB. An improvement by a factor of roughly 50 in bandwidth over the…
A Low-Power Variable Gain (VG) mm-Wave Low Noise Amplifier (LNA) is designed and simulated in a 28-nm CMOS process. The LNA utilizes a simple, yet novel, technique presented in this paper to vary the small-signal output resistance to…
We derive a lumped circuit model for inductive antenna spin-wave transducers in the vicinity of a ferromagnetic medium. The model considers the antenna's Ohmic resistance, its inductance, as well as the additional inductance due to the…
The contemporary superconductive electronics is widely using planar circuits with micrometer-scale elements for a variety of applications. With the rise of complexity of a circuit and increased number of its components, a simple impedance…