Related papers: Regional Flow Simulation in Fractured Aquifers Usi…
We introduce a Darcy-scale model to describe compressible multi-component flow in a fully saturated porous medium. In order to capture cross-diffusive effects between the different species correctly, we make use of the Maxwell--Stefan…
We consider a two-phase Darcy flow in a fractured porous medium consisting in a matrix flow coupled with a tangential flow in the fractures, described as a network of planar surfaces. This flow model is also coupled with the mechanical…
Recent years have seen a significant interest in using phase field approaches to model hydraulic fracture, so as to optimise a process that is key to industries such as petroleum engineering, mining and geothermal energy extraction. Here,…
We consider a two-phase Darcy flow in a fractured and deformable porous medium for which the fractures are described as a network of planar surfaces leading to so-called hybrid-dimensional models. The fractures are assumed open and filled…
In this paper a problem of numerical simulation of hydraulic fractures is considered. An efficient algorithm of solution is proposed for the plain strain model of hydraulic fracturing. The algorithm utilizes a FEM based subroutine to…
We reconsider the radial Saffman-Taylor instability, when a fluid injected from a point source displaces another fluid with a higher viscosity in a Hele-Shaw cell, where the fluids are confined between two neighboring flat plates. The…
Many geo-engineering applications, e.g., enhanced geothermal systems, rely on hydraulic fracturing to enhance the permeability of natural formations and allow for sufficient fluid circulation. Over the past few decades, the phase-field…
We obtain an analytical solution for the pressure-transient behavior of a vertically hydraulic fractured well in a heterogeneous reservoir. The heterogeneity of the reservoir is modeled by using the concept of fractal geometry. Such…
The paper presents a numerical method for simulating flow and mechanics in fractured rock. The governing equations that couple the effects in the rock mass and in the fractures are obtained using the discrete fracture-matrix approach. The…
Viscous flows through configurations manufactured from soft materials apply both pressure and shear stress at the solid-liquid interface, leading to deformation of the cross-section, which affects the flow rate-pressure drop relation.…
We present a mixed dimensional model for a fractured poro-elasic medium including contact mechanics. The fracture is a lower dimensional surface embedded in a bulk poro-elastic matrix. The flow equation on the fracture is a Darcy type model…
The last decade has seen a strong increase of research into flows in fractured porous media, mainly related to subsurface processes, but also in materials science and biological applications. Connected fractures totally dominate…
The turbulent flow within and above a sparse canopy is investigated using direct numerical simulations. The balance of Reynolds to viscous stresses within the canopy is observed to be similar to that over a smooth wall. From this, a scaling…
Understanding crack propagation in structures subjected to fluid loads is crucial in various engineering applications, ranging from underwater pipelines to aircraft components. This study investigates the dynamic response of structures,…
Injections of large volumes of water into tight shale reservoirs allows the extraction of oil and gas not previously accessible. This large volume "super" fracking induces damage that allows the oil and/or gas to flow to an extraction well.…
The form of the stress tensor is investigated in smooth, dense granular flows which are generated in split-bottom shear geometries. We find that, within a fluctuation fluidized spatial region, the form of the stress tensor is directly…
Integral-type nonlocal damage models describe the fracture process zones by regular strain profiles insensitive to the size of finite elements, which is achieved by incorporating weighted spatial averages of certain state variables into the…
Numerical simulation of multiphase compositional flow in fractured porous media, when all the species can transfer between the phases, is a real challenge. Despite the broad applications in hydrocarbon reservoir engineering and hydrology, a…
Wettability is a pore-scale property that impacts the relative movement and distribution of fluids in a porous medium. There are reservoir fluids that provoke the surface within pores to undergo a wettability change. This wettability…
To model rupture dynamics, a friction law must be assumed. Commonly used constitutive laws for modeling friction include slip-weakening laws which are characterized by a drop from static to dynamic frictional stress. Within this framework,…