Related papers: Surface loss simulations of superconducting coplan…
We investigate the impact of resonator geometry and its coupling with ground plane on the performance of metamaterial perfect absorbers. Using a cross-resonator as an example structure, we find that the absorber thickness can be further…
Using interplay between surface plasmons and metamaterials, we propose a new technique for novel metamaterial designs. We show that surface plasmons existing on thin metal surfaces can be used to "drive" non-resonant structures in their…
New superconducting materials, particularly iron-based superconductors (IBS), have recently attracted attention for their potential applications in particle detectors and accelerators. This paper discusses the application of these materials…
We describe measurements on microwave coplanar resonators designed for quantum bit experiments. Resonators have been patterned onto sapphire and silicon substrates, and quality factors in excess of a million have been observed. The resonant…
We present a novel lab-on-chip technique to measure the very low losses in superconducting transmission lines at (sub-) mm wavelengths. The chips consist of a 100 nm thick NbTiN Coplanar Waveguide (CPW) Fabry Perot (FP) resonator, coupled…
Tantalum is a promising platform for superconducting quantum circuits, yet coherence times remain limited by dielectric losses from interfacial two-level systems (TLS), exacerbated by native oxide regrowth. Here, we implement molecular…
The coherence of state-of-the-art superconducting qubit devices is predominantly limited by two-level-system defects, found primarily at amorphous interface layers. Reducing microwave loss from these interfaces by proper surface treatments…
Two-level systems (TLS) are known to be a dominant source of dissipation and decoherence in superconducting qubits. Superconducting resonators provide a convenient way to study TLS-induced loss due to easier design and fabrication in…
A strategy aimed at decreasing dielectric loss in coplanar waveguides (CPW) and qubits involves the creation of trenches in the underlying substrate within the gaps of the overlying metallization. Participation of contamination layers…
Improving the coherence of superconducting qubits is essential for advancing quantum technologies. While superconductors are theoretically perfect conductors, they consistently exhibit residual energy dissipation when driven by microwave…
The overall, loaded quality factor $Q_\mathrm{L}$ quantifies the loss of energy stored in a resonator. Here we discuss on general grounds how $Q_\mathrm{L}$ of a planar microwave resonator made of a conventional superconductor should depend…
We study the dispersion of the $\pi$ resonance in the superconducting state within the projected SO(5) model\cite{project}. Away from the the commensurate momentum, the propagation of the $\pi$ resonance creates phase slips in the…
Since surface acoustic waves (SAW) are often generated on substrates to which nanostrips are periodically attached, it is very important to consider the effect of interface between the deposited strip and the substrate surface, which is an…
Microwave resonators with high quality factors have enabled many recent breakthroughs with superconducting qubits and photon detectors, typically operated in shielded environments to reduce the ambient magnetic field. Insufficient shielding…
Metasurfaces providing resonances arising from quasi-bound states in the continuum have been proposed as sensors in the THz band due to the existence of strong resonances characterized by high quality factors. Controlling geometrical…
This note analytically investigates non-reciprocal wave dispersion in locally resonant acoustic metamaterials. Dispersion relations associated with space-time varying modulations of inertial and stiffness parameters of the base material and…
Study of AC losses in superconducting wires and tapes is usually restricted by consideration of applied sinusoidal currents and/or magnetic fields. However, currents in electric power systems contain a wide variety of harmonics. The…
A method for the substantial reduction of propagation loss of surface plasmons was proposed and experimentally demonstrated. The method is based on the fact that the propagation loss of the surface plasmons depends significantly on the…
We develop an analytic framework to extract circuit parameters and loss tangent from superconducting transmission-line resonators terminated by reactive loads, extending analysis beyond the perturbative regime. The formulation yields…
We analyze the scattering of the surface plasmon incident at a planar interface between two dielectrics. By using the scattering matrix technique, developed by Oulton et al. [Phys. Rev. B 76, 035408 (2007)], we calculate the transmission,…