Related papers: Control of Length and Spatial Functionality of Sin…
Single-wall carbon nanotube (SWNT) nanofibrils were assembled onto a variety of conductive scanning probes including atomic force microscope (AFM) tips and scanning tunnelling microscope (STM) needles using positive dielectrophoresis (DEP).…
AFM manipulation was used to controllably stretch individual metallic single-walled carbon nanotubes (SWNTs). We have found that SWNTs can sustain elongations as great as 30% without breaking. Scanned gate microscopy and transport…
We have measured the dynamic alignment properties of single-walled carbon nanotube (SWNT) suspensions in pulsed high magnetic fields through linear dichroism spectroscopy. Millisecond-duration pulsed high magnetic fields up to 56 T as well…
Applications based on Single Walled Carbon Nanotube (SWNT) are good example of the great need to continuously develop metrology methods in the field of nanotechnology. Contact and interface properties are key parameters that determine the…
Single-walled carbon nanotubes are promising nanoelectronic materials but face long-standing challenges including production of pure semiconducting SWNTs and integration into ordered structures. Here, highly pure semiconducting…
We report ultra-high density assembly of aligned single walled carbon nanotubes (SWNTs) two dimensional arrays via ac dielectrophoresis using high quality surfactant free and stable SWNT solutions. After optimization of frequency and…
We experimentally demonstrate laser-driven deposition of single-walled carbon nanotubes (CNTs) in suspended core fibers (SCFs) for the first time. Two samples for each SCF type with three (SCF1) and four (SCF2) air holes are individually…
We use conducting-tip atomic force microscopy (AFM) to measure local electronic properties of single wall carbon nanotube (SWNT) circuits on insulating substrates. When a voltage is applied to the tip and AFM feedback is used to position…
The wafer scale integration of carbon nanotubes (CNT) remains a challenge for electronic and electromechanical applications. We propose a novel CNT integration process relying on the combination of controlled capillary assembly and buried…
We demonstrate assembly of solution processed semiconducting enriched (99%) single walled carbon nanotubes (s-SWNT) in an array with varying linear density via ac-dielectrophoresis and investigate detailed electronic transport properties of…
A fabrication method for positioning and embedding a single-walled carbon nanotube (SWNT) across the diameter of a solid state nanopore is presented. Chemical vapor deposition (CVD) is used to grow SWNTs over arrays of focused ion beam…
Single walled carbon nanotubes (SWNTs) have attracted immense research interest because of their remarkable physical and electronic properties. In particular, electronic devices fabricated using individual SWNT have shown outstanding device…
We demonstrate the procedure of Scanning Probe Microscopy (SPM) conductive probe fabrication with a single multi-walled carbon nanotube (MWNT) on a silicon cantilever pyramid. The nanotube bundle reliably attached to the metal-covered…
A method is introduced to isolate and measure the electrical transport properties of individual single-walled carbon nanotubes (SWNTs) aligned on an ST-cut quartz, from room temperature down to 2 K. The diameter and chirality of the…
Using carbon nanotubes (CNTs) produced by chemical vapor deposition, we have explored different strategies for the preparation of carbon nanotube devices suited for electrical and mechanical measurements. Though the target device is a…
A simple method to disperse individual single walled carbon nanotubes (SWCNT ) on an atomically flat substrate is presented. Proper tuning of ac modes of atomic force microscopes(AFM) is discussed. This is needed to discriminate between…
The mechanical stability of open single wall carbon nanotubes (SWCNT) under axial stress (compression and tension) and twist has been re-examined in a search of specific tube-length and load scaling. SWCNT with different chiralities and…
Field electron emission (FE) from a structure-defined single-walled carbon nanotube (SWNT) was observed experimentally. A series of observations of the same SWNT by scanning electron microscopy, field emission microscopy and transmission…
Carbon nanotubes are a good realization of one-dimensional crystals where basic science and potential nanodevice applications merge. Defects are known to modify the electrical resistance of carbon nanotubes. They can be present in as-grown…
Single walled carbon nanotubes (SWNT) have displayed a wealth of quantum transport phenomena thus far. Defect free, unperturbed SWNTs with wellbehaved or tunable metal contacts are important to probing the intrinsic electrical properties of…