Related papers: Dislocation Driven Chromium Precipitation in Fe-9C…
Coarsening of precipitates in coherent systems is influenced by the elastic fields of the precipitates and the interfacial curvature. It is also known that if precipitates are connected by dislocations, coarsening is affected by the elastic…
We report evidence of Re and Mo segregation (up to 2.6 at.% and 1 at.%) along with Cr and Co to the dislocations inside of {\gamma}' precipitates in a second generation Ni-based single crystal superalloy, after creep deformation at…
In this work, the evolution of nanomechanical properties was studied systematically as a function of temperature, chemical, and microstructural complexity of different Fe-based alloys. Experiments were performed at different temperatures…
The iron-chromium alloy and its derivatives are widely used for their remarkable resistance to corrosion, which only occurs in a narrow concentration range around 9 to 13 atomic percent chromium. Although known to be due to chromium…
The precipitation microstructure of the \gamma' (AlAg2) intermetallic phase has been examined in aluminium-silver-copper alloys. The microstructure developed in an Al-0.90at.%Ag-0.90at.%Cu alloy was significantly different from that…
Phase separation in strained and strain-free samples of Fe84.85Cr15.15 induced by an isothermal annealing at 402 deg C up to 3888 h was studied by means of the Mossbauer spectroscopy. The measured Fe-site spectra were analyzed with two…
We exploit a precipitation-redispersion mechanism for complexation of short chain polyelectrolytes with cerium oxide nanoparticles to extend their stability ranges. As synthesized, cerium oxide sols at pH 1.4 consist of monodisperse…
The study was aimed at determination of the position of the Fe-rich border of the metastable miscibility gap (MMG) and of the solubility limit of Cr in iron at 858 K. Towards this end a Fe73.7Cr26.3 alloy was isothermally annealed at 858 K…
Defects play a key role in deciding the mechanisms and kinetics of phase transformations. In this paper, we show how dislocations influence phase separation in alloys with miscibility gap. Specifically, depending on the ratio of pipe…
In the experiment on superfluid transport in solid He4 [PRL {\bf 100}, 235301 (2008)], Ray and Hallock observed an {\it anomalously large isochoric compressibility}: the supersolid samples demonstrated a significant and apparently spatially…
Concentration of Cr in the Fe-rich alpha-phase, x, resulted from a phase decomposition caused by an isothermal annealing at T = 415 and 450 C of a non-irradiated (NR) Fe-Cr14 EFDA sample and that of a He-ions irradiated (IR) one annealed at…
Age hardening induced by the formation of (semi)-coherent precipitate phases is crucial for the processing and final properties of the widely used Al-6000 alloys. Early stages of precipitation are particularly important from the fundamental…
As circuitry approaches single nanometer length scales, it is important to predict the stability of metals at these scales. The behavior of metals at larger scales can be predicted based on the behavior of dislocations, but it is unclear if…
We apply a combinatorial approach to study the influence of Mg concentration on the precipitation kinetics in an Al-Cu-Li alloy using a diffusion couple made by linear friction welding. The precipitation kinetics is monitored in the…
The mechanisms of dislocation/precipitate interaction were studied by means of discrete dislocation dynamics within a multiscale approach. Simulations were carried out using the discrete continuous method in combination with a fast Fourier…
This work gives insights into processing and characterisation of bulk nanocrystalline FeCr materials. The investigated FeCr alloys, consisting of 30, 50 and 70 at.% ferromagnetic Fe and remaining anti-ferromagnetic Cr, are processed by arc…
The critical resolved shear stress of an Al 4 wt. \% Cu alloy containing a homogeneous distribution of $\theta''$ precipitates was determined by means of dislocation dynamics simulations. The size distribution, shape, orientation and volume…
Three novel precipitation strengthened bcc alloys which exhibit a smooth microstructural gradient with composition have been fabricated in bulk form by induction casting. All three alloys are comprised of a mixture of disordered A2-(Fe, Cr)…
The mechanical properties of Mg-Al alloys are greatly influenced by the complex intermetallic phase Mg$_{17}$Al$_{12}$, which is the most dominant precipitate found in this alloy system. The interaction of basal edge and 30$^\text{o}$…
The process of natural aging in pure ternary Al-Mg-Si alloys was studied by positron annihilation lifetime spectroscopy in real time in order to clarify the sequence and kinetics of clustering and precipitation. It was found that natural…