Related papers: Performance of MF-MSK Systems with Pre-distortion …
Kinetic-inductance traveling-wave parametric amplifiers (KI-TWPAs) offer broadband near-quantum-limited amplification with high saturation power. Due to the high critical magnetic fields of high-kinetic-inductance materials, KI-TWPAs should…
Radio telescope front ends must have simultaneously low noise and sufficiently-high linearity to accommodate interfering signals. Typically these are opposing design goals. For modern radio telescopes operating in the HF (3-30 MHz) and…
Transformer-based speech enhancement models yield impressive results. However, their heterogeneous and complex structure restricts model compression potential, resulting in greater complexity and reduced hardware efficiency. Additionally,…
Large array-based transmission uses the combination of a massive number of antenna elements and clever precoder designs to achieve array gain and spatially multiplex different users. These precoders require linear front-ends, and more…
Movable antenna (MA)-enabled near-field (NF) communications offer significant potential for 6G, yet existing designs often neglect the practical constraints of hybrid beamforming (HBF) for extremely large-scale MIMO (XL-MIMO). Conversely,…
Hybrid precoding has been recently proposed as a cost-effective transceiver solution for millimeter wave (mm-wave) systems. While the number of radio frequency (RF) chains has been effectively reduced in existing works, a large number of…
In massive MIMO base stations, power consumption and cost of the low-noise amplifiers (LNAs) can be substantial because of the many antennas. We investigate the feasibility of inexpensive, power efficient LNAs, which inherently are less…
In this work, we propose an iterative scheme for computing a linear precoder that takes into account the impact of hardware impairments in the multiuser multiple-input single-output downlink. We particularly focus on the case when the…
In this paper, robust transceiver design with Tomlinson-Harashima precoding (THP) for multi-hop amplify-and-forward (AF) multiple-input multiple-output (MIMO) relaying systems is investigated. At source node, THP is adopted to mitigate the…
Modular extremely large-scale MIMO (XL-MIMO) architectures combined with wireless fronthaul provide a scalable alternative to monolithic arrays, but their performance is sensitive to hardware impairments and resource allocation strategies.…
The fluid antenna system (FAS) is a disruptive tech-nology for future wireless communication networks. This paper considers the joint optimization of beamforming matrices and antenna positions for weighted sum rate (WSR) maximization in…
This paper focuses on the performance analysis of a class of limited peak-to-average power ratio (PAPR) precoders for downlink multi-user massive multiple-input multiple-output (MIMO) systems. Contrary to conventional precoding approaches…
This paper presents an investigation into parameter adaptation in behavioral model--based digital predistortion for radio frequency power amplifiers. A novel measurement setup framework that emulates real--time adaptation in transmitters is…
Optical amplification, crucial for modern communication and data center interconnects, primarily relies on erbium-doped fiber amplifiers (EDFAs) to enhance signals without distortion. While EDFAs were historically decisive for the…
This work focuses on designing a power-efficient network for Dynamic Metasurface Antennas (DMA)-aided multi-user multiple-input single-output (MISO) antenna systems. Power efficiency is achieved through holographic beamforming in a…
The current evolution towards a massive number of antennas and a large variety of transceiver architectures forces to revisit the conventional techniques used to improve the fundamental power amplifier (PA) linearity-efficiency trade-off.…
A method for increasing efficiency of radio frequency (RF) amplifier employing laterally diffused metal oxide semiconductor (LDMOS) transistors coupled to an RF exciter depending on the emission mode of modulated RF input signals generated…
This letter studies the energy-efficient design in a downlink multi-antenna multi-user system consisting of a multi-antenna base station (BS) and multiple single-antenna users, by considering the practical non-linear power amplifier (PA)…
Radio frequency (RF) wireless power transfer (WPT) is a key technology for future low-power wireless systems. However, the inherently low end-to-end power transfer efficiency (PTE) is challenging for practical applications. The main factors…
This paper proposes the design of robust transceivers with Tomlinson-Harashima precoding (THP) for multiple-input multiple-output (MIMO) relay systems with amplify-and-forward (AF) protocols based on a multi-branch (MB) strategy. The MB…