Related papers: Dealloying of Platinum-Aluminum Thin Films Part I.…
Dealloying is a common corrosion process during which an alloy is "parted" by the selective dissolution of the electrochemically more active elements. This process results in the formation of a nanoporous sponge composed almost entirely of…
We study a thin film growth model with temperature activated diffusion of adsorbed particles, allowing for the formation of overhangs and pores, but without detachment of adatoms or clusters from the deposit. Simulations in one-dimensional…
Highly porous Pt/Al thin film electrodes on yttria stabilized zirconia electrolytes were prepared by dealloying of co-sputtered Pt/Al films. The oxygen reduction capability of the resulting electrodes was analyzed in a solid oxide fuel cell…
Dewetting of a binary alloy thin film is studied using a continuum many-parameter model that accounts for the surface and bulk diffusion, the bulk phase separation, the surface segregation and the particles formation. Analytical solution is…
During the growth of metal thin films on dielectric substrates at a given deposition temperature T, the film's morphology is conditioned by the magnitude and asymmetry of up- and downhill diffusion. Any severe change of this mechanism leads…
Organisms in nature can alter the short-range order of an amorphous precursor phase, thereby controlling the resulting crystalline structure. This phenomenon inspired an investigation of the effect of modifying the short-range order within…
Hydrodynamic pattern formation (PF) and dewetting resulting from pulsed laser induced melting of nanoscopic metal films have been used to create spatially ordered metal nanoparticle arrays with monomodal size distribution on…
Reactive dual ion beam sputter deposition of AlN thin films was carried out for the analysis of surface growth characteristics by Atomic Force Microscopy. The variation of roughness as a function of deposition time was analysed by Dynamic…
Freezing of dispersions is omnipresent in science and technology. While the passing of a freezing front over a solid particle is reasonably understood, this is not so for soft particles. Here, using an oil-in-water emulsion as a model…
This paper reports the study of growth kinetics of ion beam sputtered aluminum thin films. Dynamic scaling theory was used to derive the kinetics from AFM measurements. AFM imaging revealed that surface incorporates distinctly different…
A mathematical model is developed to analyze the growth/decay rate of surface perturbations of an ultrathin metal film on an amorphous substrate (SiO_{2}). The formulation combines the approach of Mullins [J. Appl. Phys. v30, 77, 1959] for…
The dynamics of thermal and non-thermal lattice deformation of nanometer thick polycrystalline aluminum film has been studied by means of femtosecond (fs) time-resolved electron diffraction. We utilized two different pump wavelengths: 800…
Micron-thick boron films have been deposited by Pulsed Laser Deposition in vacuum on several substrates at room temperature. The use of high energy pulses (>700 mJ) results in the deposition of smooth coatings with low oxygen uptake even at…
The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by…
In this paper, we report the growth of NaxCoO2 thin films by pulsed-laser deposition (PLD). It is shown that the concentration of sodium is very sensitive to the substrate temperature and the target-substrate distance due to the evaporation…
Thin film metallic glasses undergoing devitrification can form partially crystallized or fully crystallized materials with novel structural and magnetic properties. The development of desired and tunable properties of such systems drives…
The dewetting dynamics of an ultrathin film is studied in the presence of evaporation - or reaction - of adatoms on the substrate. KMC simulations are in good agreement with an analytical model with diffusion, rim facetting, and substrate…
Rotating fans are the prevalent forced cooling method for heat generating equipment and buildings. As the concentration of atmospheric pollutants has increased, the accumulation of microscale and nanoscale particles on surfaces due to…
Nanoparticles grown in a plasma are used to visualize the process of film deposition in a pulsed radio-frequency (rf) atmospheric pressure glow discharge. Modulating the plasma makes it possible to successfully prepare porous TiO2 films. We…
Realizing laterally continuous ultra-thin gold films on transparent substrates is a challenge of significant technological importance. In the present work, formation of ultra-thin gold films on fused silica is studied, demonstrating how…