Related papers: Waveguide grating mirror in a fully suspended 10 m…
In this paper the experimental demonstration of a Silicon-on-Insulator Reflective Arrayed Waveguide Grating (R-AWG) is reported. The device employs one Sagnac loop mirror per arm in the array, built with a 1x2 input/outputs, 50:50 splitting…
We present direct UV-written waveguides and Bragg gratings operating at 780 nm. By combining two gratings into a Fabry-Perot cavity we have devised and implemented a novel and practical method of measuring the group delay of Bragg gratings.
We demonstrate a micro-Fabry-P\'erot cavity array through laser etching of high-surface-quality mirrors onto a single fused silica substrate. A cavity finesse of $4750\pm 200$ was achieved with a simple array design with $500~\mu m$ cavity…
A stable optical resonator has been built using a 30 micrometer-wide, metal-coated microcantilever as one mirror. The second mirror was a 12.7 mm-diameter concave dielectric mirror. By positioning the two mirrors 75 mm apart in a…
We study a Fabry-Perot cavity formed from a ridge waveguide on a AlGaAs substrate. We experimentally determined the propagation losses in the waveguide at 780 nm, the wavelength of Rb atoms. We have also made a numerical and analytical…
Diffraction gratings with high upward diffraction efficiency and large effective length are required for chip-scale light detection and ranging. In this paper, we propose a diffraction grating based on a multilayer silicon nitride…
Direct observations of gravitational waves at frequencies below 10 Hz will play crucial roles for fully exploiting the potential of gravitational wave astronomy. One approach to pursue this direction is the utilization of laser…
A method of detecting of short scalar gravitational waves with a wavelength of ~ 0.5 micrometers is proposed, in contrast to LIGO Project, aimed at detecting of long quadrupole gravitational waves with a wavelength in interval from 43 till…
Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications, where they typically require precise stabilization of their optical…
We have realized a fiber-based Fabry-Perot cavity with CO2 laser-machined mirrors. It combines very small size, high finesse F>=130000, small waist and mode volume, and good mode matching between the fiber and cavity modes. This combination…
We propose two Fabry-Perot cavities, each pumped through both the mirrors, positioned in line as a toy model of the gravitational-wave (GW) detector free from displacement noise of the test masses. It is demonstrated that the displacement…
We have realized a suspended, high-reflectivity focusing metamirror ($f\approx 10$ cm, $\mathcal{R} \approx 99\%$) by non-periodic photonic crystal patterning of a Si$_3$N$_4$ membrane. The design enables construction of a stable, short…
In this paper we report suspended silicon waveguides operating at a wavelength of 7.67 mm with a propagation loss of 3.1 ? 0.3 dB/cm. To our knowledge this is the first demonstration of low loss silicon waveguides at such a long wavelength,…
Recent researches show that the fluctuations of the dielectric mirrors coating thickness can introduce a substantial part of the future laser gravitational-wave antennae total noise budget. These fluctuations are especially large in the…
A high reflectivity and polarization selective high contrast grating mirror has been designed with the use of an automated optimization algorithm. Through a precise study of the tolerance of the different lengths of the structure, the…
We experimentally realize a Fabry-Perot-type optical microresonator near the cesium D2 line wavelength based on a tapered optical fiber, equipped with two fiber Bragg gratings which enclose a sub-wavelength diameter waist. Owing to the very…
We characterize a Fabry-Perot microwave cavity designed for trapping atoms and molecules at the antinode of a microwave field. The cavity is fed from a waveguide through a small coupling hole. Focussing on the compact resonant modes of the…
We analyze an optical 3-port reflection grating by means of a scattering matrix formalism. Amplitude and phase relations between the 3 ports, i.e. the 3 orders of diffraction are derived. Such a grating can be used as an all-reflective,…
The recent development of the terahertz waveguide makes it an excellent platform for integrating many intriguing functionalities, which offers tremendous potential to build compact and robust terahertz systems. In the context of…
We demonstrate a simple, compact, and cost-effective laser noise reduction method for stabilizing an extended cavity diode laser to a 3x105 finesse mirror Fabry-P\'erot (F-P) cavity corresponding to resonance linewidth of 10 kHz using a…