Related papers: Injection and extraction magnets: septa
Each stage of an accelerator system has a limited dynamic range and therefore a chain of stages is required to reach high energy. A combination of septa and kicker magnets is frequently used to inject and extract beam from each stage. The…
This paper gives an overview of the beam injection and extraction principles for accelerators. After a brief general introduction, it explains different methods of injecting the beam for hadron and lepton machines. It describes single- and…
Fast kicker magnets are used to inject beam into and eject beam out of the CERN accelerator rings. These kickers are generally transmission line type magnets with a rectangular shaped aperture through which the beam passes. Unless special…
Here we present designs for a static septum magnet with two adjacent apertures where ideally one aperture has a uniform dipole field and the other zero field. Two designs are considered. One is a true septum magnet with a thin layer of…
Beam transfer, such as injection into or extraction from an accelerator, is one of the most critical moments in terms of machine protection in a high-intensity machine. Special equipment is used and machine protection aspects have to be…
The proton irradiation accelerator is widely founded for industry application, and should be designed as compact, reliable, and easy operate. A 10 MeV proton beam is designed to be injected into the slow circulation ring with the repetition…
The efficiency of the beam extraction and collimation systems in circular accelerators with the use of the channeling effect in a bent crystal is determined. The dependences of the extraction efficiency on the geometrical parameters of the…
The CLIC damping rings will produce ultra-low emittance beam, with high bunch charge, necessary for the luminosity performance of the collider. To limit the beam emittance blow-up due to oscillations, the pulse power modulators for the…
One of the decisive issues in the design and operation of cyclotrons is the choice of the beam extraction method. Typical methods are extraction by electrostatic extractors and by stripping. The former method requires DC high voltage…
The Oak Ridge National Laboratory STS Project will enhance the Spallation Neutron Source by adding a new neutron source. The upgrade includes a 30% increase in beam energy and a 50% boost in beam current, doubling the accelerator's power…
The fast extraction kicker system is one of the most important accelerator components, whose inner structure will be the main source of the impedance in the RCS. It is necessary to understand the kicker impedance before its installation…
This paper presents the physical background for particle extraction from IHEP accelerator using short bent silicon crystals, analyses the results of the studies, considers in detail the regime of simultaneous work of crystal extraction and…
In this paper we describe the theory of a device that is able to extract energy from an external magnetic field. The device is a cylindrical magnetic insulator that once put in rotation makes electromagnetic angular momentum to be stored in…
In synchrotron machines, the beam extraction is accomplished by a combination of septa and kicker magnets which deflect the beam from an accelerator into another. Ideally the kicker field must rise/fall in between the beam bunches. However,…
It has been shown that the use of a bent crystal with a variable curvature radius makes it possible to reduce the fraction of dechanneled particles by an order of magnitude. This effect enables the strong reduction of the particle density…
New crystal technique - array of bent strips and a fan-type reflector, based on thin straight plates - have been used for research of extraction and collimation a circulating beam in the U-70 accelerator at the energy 50 GeV and 1.3 GeV. It…
We introduce a practical approach to extract the symplectic transfer maps for arbitrary magnetic beam-line elements. Beam motion in particle accelerators depends on linear and nonlinear magnetic fields of the beam-line elements. These…
Particle accelerators use a great variety of power converters for energizing their sub-systems; while the total number of power converters usually depends on the size of the accelerator or combination of accelerators (including the…
Relativistically-intense laser beam with large field gradient ("laser gate") enables strong inelastic scattering of electrons crossing the beam. This process allows for multi-MeV electron net acceleration per pass within the wavelength…
The extraction system of CSNS mainly consists of two kinds of magnets: eight kickers and one lambertson magnet. In this paper, firstly, the magnetic test results of the eight kickers were introduced and then the filed uniformity and…