Related papers: Transition Edge Sensor Thermometry for On-chip Mat…
In the described device, the thermal emissivity or absorptivity of the sample is measured by substitution of the radiative heat flow between two parallel surfaces by thermal output of a heater. Fast measurements of the mutual emissivity for…
This work introduces a thermoreflectance-based system designed to measure the surface temperature field of activated microelectronic devices at submicron spatial resolution with either a laser or a CCD camera. The article describes the…
Electroplated Bismuth (Bi) is commonly used in Transition-Edge Sensors (TESs) for X-rays because of its high stopping power and low heat capacity. Electroplated Bi is usually grown on top of another metal that acts as seed layer, typically…
A photon-number resolving transition edge sensor (TES) is used to measure the photon-number distribution of two microcavity lasers. The investigated devices are bimodal microlasers with similar emission intensity and photon statistics with…
Material thermal properties characterization at nanoscales remains a challenge even if progresses were done in developing specific characterization techniques like the Scanning Thermal Microscopy (SThM). In the present work, we propose a…
We have developed a new micro-fabricated platform for the measurement of the specific heat of low heat capacity mg-sized metallic samples, such as superconductors, down to temperatures of as low as $10\,\mathrm{mK}$. It addresses…
A superconducting Transition-Edge Sensor (TES) with low-$T_c$ is essential in a high resolution calorimetric detection. With a motivation of developing sensitive calorimeters for applications in cryogenic neutrinoless double beta decay…
Cryogenic temperatures are the prerequisite for many advanced scientific applications and technologies. The accurate determination of temperature in this range and at the submicrometer scale is, however, nontrivial. This is due to the fact…
Arrays of hundreds or thousands of low temperature detectors have been deployed for many experiments, both bolometers for long wavelength applications and calorimeters for shorter wavelength applications. One challenge that is common to…
A new analysis method has been developed for measurements of broadband, low-amplitude turbulent electron temperature fluctuations in fusion plasmas using individual radiometer channels of a Correlation Electron Cyclotron Emission (CECE)…
A sensor for thermal and thermodynamic measurements of small magnetic systems have been designed and built. It is based on a 5μm-thick suspended polymer membrane, which has a very low heat capacity (≈ 10-6 J/K at nitrogen…
Understanding microstructural evolution under extreme thermal conditions is essential for advancing metal additive manufacturing (AM). This work demonstrates the feasibility of employing micro-electro-mechanical system (MEMS) heating…
In this paper we explore the application of cryogenic imaging spectrophotometers. Prototypes of this new class of detector, such as superconducting tunnel junctions (STJs) and transition edge sensors (TESs), currently deliver low resolution…
We report on a non-interacting technique for thermal characterization of fluids based on surface plasmon resonance interrogation. Using liquid volumes less than 20 micro liters we have determined the materials' thermo-optic coefficients…
The so-called excess noise limits the energy resolution of transition-edge sensor (TES) detectors, and its physical origin has been unclear, with many competing models proposed. Here we present the noise and impedance data analysis of a…
Feature sizes in integrated circuits have decreased substantially over time, and it has become increasingly difficult to three-dimensionally image these complex circuits after fabrication. This can be important for process development,…
The Transition-Edge Sensors (TES) is a mature, high-resolution x-ray spectrometer technology that provides a much higher efficiency than dispersive spectrometers such as gratings and crystal spectrometers. As larger arrays are developed,…
The Any Light Particle Search II (ALPS II) experiment at DESY, Hamburg, is a Light-Shining-through-a-Wall (LSW) experiment aiming to probe the existence of axions and axion-like particles (ALPs), which are candidates for dark matter. Data…
Precise physical properties of the known transiting exoplanets are essential for their precise atmospheric characterization using modern and upcoming instruments. Leveraging the large volume of high SNR photometric follow-up data from TESS,…
Thermal Energy Storage (TES) devices, which leverage the constant-temperature thermal capacity of the latent heat of a Phase Change Material (PCM), provide benefits to a variety of thermal management systems by decoupling the absorption and…