Related papers: Numerical simulations of heat transfer in plane ch…
It has previously been shown that by increasing the Reynolds number across a channel by spatially varying the viscosity does not cause an immediate change in the size of turbulent structures and a delay is in fact observed in both wall…
To fully evaluate a turbulent flow, Direct Numerical Simulation (DNS) is the most accurate method by far and requires considerable computational power and time; not optimum for industry standards. Developing an alternative model, providing…
In this paper, the novel experimental data reported by Qin et al. [1] are used to assess the predictive capability of the Realizable k-epsilon (RKE) model and Reynolds stress transport (RST) model for buoyant jets and understand the reasons…
Turbulent flow has been extensively studied using computational fluid dynamics (CFD) simulations since turbulent flow regime is so frequently encountered in both academic and engineering applications. The high-fidelity simulation of the…
Reynolds-Averaged Navier-Stokes(RANS) method will still play a vital role in the following several decade in aerospace engineering. Although RANS models are widely used, empiricism and large discrepancies between models reduce the…
This work determines the inaccuracy of using Reynolds averaged Navier Stokes (RANS) turbulence models in transition to turbulent flow regimes by predicting the model-based discrepancies between RANS and large eddy simulation (LES) models…
Hypersonic flow conditions pose exceptional challenges for Reynolds-Averaged Navier-Stokes (RANS) turbulence modeling. Critical phenomena include compressibility effects, shock/turbulent boundary layer interactions, turbulence-chemistry…
Airflow simulation results depend on a good prediction of near wall turbulence. In this paper a comparative study between different near wall treatments is presented. It is applied to two test cases: (1) the first concerns the fully…
Although Reynolds-Averaged Navier-Stokes (RANS) equations are still the dominant tool for engineering design and analysis applications involving turbulent flows, standard RANS models are known to be unreliable in many flows of engineering…
Solving the Reynolds-averaged Navier-Stokes equations (RANS) closed with an eddy viscosity computed through a turbulence model is still the leading approach for Computational Fluid Dynamics simulations. Unfortunately, universal models with…
This study analyzes the behavior of a differentially heated channel flow by means of a direct numerical simulations (DNS) with variable thermophysical properties under low-speed conditions focusing on the impact of the temperature gradient…
The design of film cooling systems relies heavily on Reynolds-Averaged Navier-Stokes (RANS) simulations, which solve for mean quantities and model all turbulent scales. Most turbulent heat flux models, which are based on isotropic diffusion…
Understanding the coolant thermal hydraulics in rod bundles is essential to the design of nuclear reactors. However, flows with low Reynolds numbers present serious modeling challenges, especially in heat transfer and natural convection.…
A numerical study for a hydrogen (H2) jet in an air crossflow (JICF) was performed using direct numerical simulation (DNS), large eddy simulation (LES), and Reynolds-averaged Navier-Stokes (RANS) approaches, based on a geometry…
A priori tests of turbulence models for the compressible Reynolds-Averaged Navier--Stokes (RANS) are performed by using Direct Numerical Simulations (DNS) data of zero-pressure-gradient flat-plate turbulent boundary layers. The DNS database…
Most turbulence models used in Reynolds-averaged Navier-Stokes (RANS) simulations are partial differential equations (PDE) that describe the transport of turbulent quantities. Such quantities include turbulent kinetic energy for eddy…
Data-driven turbulence modeling is a newly emerged research area in thermal hydraulics simulation of nuclear power plant (NPP). The most common CFD method used in NPP thermal hydraulics simulation is Reynolds-averaged Navier-Stokes (RANS)…
A new approach to turbulence simulation, based on a combination of large-eddy simulation (LES) for the whole flow and an array of non-space-filling quasi-direct numerical simulations (QDNS), which sample the response of near-wall turbulence…
Direct numerical simulations of turbulent heat transfer in fully-developed channel flows have been performed in a range of friction Reynolds number between 60 and 180, based on the friction velocity and the channel half width $\delta$, with…
Results of direct numerical simulations (DNS) of porous-wall turbulent flows in open channels with conjugate heat transfer are reported in this work. For the conductive porous walls considered here, the change in heat transfer is not…