Related papers: Templated self-assembly of iron oxide nanoparticle…
Solid electrolytes (SEs) for sodium-based superionic conductors (NaSICON) are widely recognized for their excellent ionic conductivity and application in sodium based energy storage systems. While considerable effort has been made to…
Patterns generated by a colloidal suspension of nanospheres drying on a frictional substrate are studied by experiments and computer simulations. The obtained two-dimensional self-assembled structures are commonly used for nanosphere…
The fabrication of metallic single-walled carbon nanotube electrodes separated by gaps of typically 20nm width by electron-beam-induced oxidation is studied within an active device configuration. The tube conductance is measured…
Binary collision simulations of high-fluence 1 keV Si ion implantation into 8 nm thick SiO2 films on (001)Si were combined with kinetic Monte Carlo simulations of Si nanocrystal (NC) formation by phase separation during annealing. For…
Here we demonstrate nanometer thick iron garnet films suitable for the magneto-optical applica-tions. Bismuth-substituted iron garnet films of compositions Bi{_1}Y{_2}Fe{_5}O{_{12}} and Bi{_1}Tm{_2}Fe{_5}O{_{12}} deposited on gadolinium…
We have synthesized nanoscale magnetic compasses with high yield. These ferromagnetic iron carbide nano-particles, which are encapsulated in a pair of parallel carbon needles, change their direction in response to an external magnetic…
The recent development of freestanding oxide thin films opens up exciting opportunities for the design of novel heterostructures with enhanced functionalities. Here, we explore the fabrication of membranes consisting of dense arrays of…
Co-assembly of inorganic nanoparticles (NPs) and nanostructured polymer matrix represents an intricate interplay of enthalpic or entropic forces. Particle size largely affects the phase behavior of the nanocomposite. Theoretical studies…
We present a facile desktop fabrication method for origami-based nano-gap indium tin oxide (ITO) electrokinetic particle traps, providing a simplified approach compared to traditional lithographic techniques and effectively trapping of…
A free standing transparent film of solid state polymer electrolyte based on PEO/PAN + NaPF6 with different compositions of nano sized TiO2 in weight percent (x = 0, 1, 2, 5, 10, 15, 20 ) is synthesized by using standard solution cast…
The focused helium ion beam microscope is a versatile imaging and nanofabrication instrument enabling direct-write lithography with sub-10-nm resolution. Subsurface damage and swelling of substrates due to helium ion implantation is…
Periodically corrugated epitaxial graphene and hexagonal boron nitride (h-BN) on metallic substrates are considered as perspective templates for the self-assembly of nanoparticles arrays. By using first-principles calculations, we determine…
We consider the self-assembly of composite structures from a group of nanocomponents, each consisting of particles within an $N$-atom system. Self-assembly pathways and rates for nanocomposites are derived via a multiscale analysis of the…
Almost regular hexagonal arrays of a few micrometers tall and wide micropyramids consisting of soot nano-particles are formed on the surface of graphitized hollow filaments, which are resistively heated to ~1800$^\circ$C-2400$^\circ$C in an…
Nanoscale lithography on SrRuO3 (SRO) thin film surfaces has been performed by scanning tunneling microscopy under ambient conditions. The depth of etched lines increases with increasing bias voltage but it does not change significantly by…
The optical properties of metallic tin nanoparticles embedded in silicon-based host materials were studied. Thin films containing the nanoparticles were produced using RF magnetron sputtering followed by ex situ heat treatment. Transmission…
We report on the structural and magnetic properties of thin Ge(1-x)Mn(x)films grown by molecular beam epitaxy (MBE) on Ge(001) substrates at temperatures (Tg) ranging from 80deg C to 200deg C, with average Mn contents between 1 % and 11 %.…
Colloidal chemistry of nanomaterials experienced a tremendous development in the last decades. In the course of the journey 0D nanoparticles, 1D nanowires, and 2D nanosheets have been synthesized. They have in common to possess a simple…
Self-assembly processes allow us to design and create complex nanostructures using molecules as building blocks and surfaces as scaffolds. This autonomous driven construction is possible due to a complex thermodynamic balance of…
An application of the radiolysis method using X-ray synchrotron beam is developed as a novel approach to the synthesis of metal-organic films with controlled shapes and thickness. We demonstrate that a Langmuir monolayer deposited onto a…