Related papers: YBa2Cu3O7 grain boundary junctions and low-noise s…
We present ferromagnetic Nb/Al2O3/Ni60Cu40/Nb Josephson junctions (SIFS) with an ultrathin Al2O3 tunnel barrier. The junction fabrication was optimized regarding junction insulation and homogeneity of current transport. Using…
Superconducting quantum interference device (SQUID) which is made of two parallel Josephson junctions has applications in magnetometry. A similar spin-based device is proposed here where spin superfluid in ferromagnet (FM) mimics the…
We report here an atomic resolution study of the structure and composition of the grain boundaries in polycrystalline Sr0.6K0.4Fe2As2 superconductor. A large fraction of grain boundaries contain amorphous layers larger than the coherence…
Nanoscale superconducting quantum interference devices (SQUIDs) are fabricated in-situ from a single Bi$_{0.26}$Sb$_{1.74}$Te$_{3}$ nanoribbon that is defined using selective-area growth and contacted with superconducting Nb electrodes via…
Focused ion beam (FIB) technology has been used to fabricate miniature Nb DC SQUIDs which incorporate resistively-shunted microbridge junctions and a central loop with a hole diameter ranging from 1058 nm to 50 nm. The smallest device, with…
We report the fabrication and characterization of superconducting quantum interference devices (SQUIDs) made of Sb-doped Bi2Se3 topological insulator (TI) nanoribbon (NR) contacted with PbIn superconducting electrodes. When an external…
We have designed and characterized a micro-SQUID with dispersive readout for use in low temperature scanning probe microscopy systems. The design features a capacitively shunted RF SQUID with a tunable resonance frequency from 5 to 12 GHz,…
The critical current density flowing across low angle grain boundaries in YBa$_2$Cu$_3$O$_{7-\delta}$ thin films has been studied magnetometrically. Films (200 nm thickness) were deposited on SrTiO$_3$ bicrystal substrates containing a…
We present measurements of an amplifier operating at 3.8 GHz with 150 MHz of bandwidth based on the microstrip input-coil resonance of a dc superconducting quantum interference device (SQUID) with submicron Josephson junctions. The noise…
We demonstrate the fabrication of scanning superconducting quantum interference devices (SQUIDs) on the apex of sharp quartz scanning probes -- known as SQUID-on-tip probes -- using conventional magnetron sputtering. We produce and…
A novel rf-SQUID flux qubit that is robust against fabrication variations in Josephson junction critical currents and device inductance has been implemented. Measurements of the persistent current and of the tunneling energy between the two…
A minimal method to fabricate Al/AlO$_x$/Al Josephson junctions (JJs) using photolithography and argon etching, before metallization and oxidation, is demonstrated. JJs with areas ranging from 1 to 6 $\mu$m$^2$ can be fabricated and, with…
We report on the fabrication and characterization of microSQUID devices based on nanoscale vanadium/copper/vanadium Josephson weak links. Magnetically driven quantum interference patterns have been measured for temperatures in the 0.24 - 2…
An ordinary superconducting quantum interference device (SQUID) contains two weak links connected in parallel. We model a multiple-wire SQUID (MW-SQUID), generalized in two ways. First, the number of weak links, which are provided by…
We characterize a niobium-based superconducting quantum interference proximity transistor (Nb-SQUIPT) built upon a Nb-Cu-Nb SNS weak link. The Nb-SQUIPT and SNS devices are fabricated simultaneously in two separate lithography and…
The magnetic field noise in superconducting quantum interference devices (SQUIDs) used for biomagnetic research such as magnetoencephalography or ultra-low-field nuclear magnetic resonance is usually limited by instrumental dewar noise. We…
Nb3Sn superconducting strands are the most practical conductors to generate high magnetic fields (12-16 T), and thus have significant applications in nuclear magnetic resonance (NMR), and great potential for fusion reactors and particle…
YBaCuO nanowires were reproducibly fabricated down to widths of 50 nm. A Au/Ti cap layer on YBCO yielded high electrical performance up to temperatures above 80 K in single nanowires. Critical current density of tens of MA/cm2 at T = 4.2 K…
The dependence of the critical current density Jc on hydrostatic pressure to 0.6 GPa is determined for a single 25-degree [001]-tilt grain boundary in a bicrystalline ring of nearly optimally doped melt-textured YBa2Cu3Ox. Jc is found to…
Point contact junctions made from two pieces of MgB2 can be adjusted to exhibit either superconductor-insulator-superconductor (SIS) or superconductor-normal metal-superconductor (SNS) current-voltage characteristics. The SIS…