Related papers: Flow boiling of water on nanocoated surfaces in a …
We study the role of surface topology, surface chemistry, and wall superheat temperature on the onset of boiling, bubble nucleation and growth, and the possible formation of an insulating vapour film by means of large-scale MD simulations.…
With recent advances in micro- and nanofabrication, superhydrophilic and superhydrophobic surfaces have been developed. The statics and dynamics of fluids on these surfaces have been well characterized. However, few investigations have been…
Significant temperature effects on the electrokinetic transport in a nanochannel with a slab geometry are demonstrated using a molecular dynamics (MD) model. A system consisting of Na+ and Cl- ions dissolved in water and confined between…
This paper studies the effects of mixed convection fluid motion and heat transmission of Al2O3-Water nanofluid in a square enclosure including two heated obstacles, with temperature and nanoparticle concentration being determined by the…
An aqueous suspension of silica nanoparticles or nanofluid can alter the wettability of surfaces, specifically by making them hydrophilic and oil-repellent under water. Wettability alteration by nanofluids have important technological…
The main objective of the present study is to investigate the effect of adding nanoparticles at different concentrations and sizes to boiling distilled water on the nucleate pool boiling heat transfer performance. The major studied…
Droplet wicking and evaporation in porous nanochannels is experimentally studied on a heated surface at temperatures ranging from 35oC to 90oC. The fabricated geometry consists of cross-connected nanochannels of height 728 nm with…
Nanofluids are suspensions of nanoparticles in a base heat-transfer liquid. They have been widely investigated to boost heat transfer since they were proposed in the 1990's. We present a statistical correlation analysis of experimentally…
We observed strongly size-dependent viscoelasticity in amorphous SiO2 and Si nanotubes with shell thickness down to ~8 nm. A core-shell model shows that a ~1 nm thick fluid-like surface layer has a significant effect on the mechanical…
The influence of the external pressure and surface energy on the wetting transition at nanotextured interfaces is studied using molecular dynamics and continuum simulations. The surface roughness of the composite interface is introduced via…
With the recent important development of microfluidic systems, miniaturization of flow devices has become a real challenge. Microchannels, however, are characterized by a large surface to volume ratio, so that surface properties strongly…
This paper reports the dynamic wetting behavior and heat transfer characteristics for impinging droplets on heated bi-phobic surfaces (superhydrophobic matrix with hydrophobic spots). A non-patterned superhydrophobic and a sticky…
This article presents a computational study of saturated flow boiling in non-circular microchannels. The unit channel of a multi-microchannel evaporator, consisting of the fluidic channel and surrounding evaporator walls, is emulated and…
Flow boiling in microchannel heat sinks is an efficient way to dissipate high heat flux by utilizing the large surface-to-volume ratio and high latent heat. Previous studies of boiling heat transfer in microchannels mainly consider the…
Non-equilibrium molecular dynamics (NEMD) simulations were used to study pool boiling of water films on an ultra-thin planar aluminum substrate as well as the effect of surface wettability. The simulation geometry is a 10 nm-thick water…
In the present study, a 1-dimensional model is proposed to estimate the pressure drop and heat transfer coefficient for flow boiling in a rectangular microchannel. The present work takes into account the pressure fluctuations caused due to…
Surface tension and wetting are dominating physical effects in micro and nanoscale flows. We present an efficient and reliable model of surface tension and equilibrium contact angles in Smoothed Particle Hydrodynamics for free-surface…
The present work is related to the study of the nitrogen gas flow through diverging micro and nano-channels. The direct simulation Monte-Carlo (DSMC) method has been used to study the flow. The Simplified Bernoulli Trials (SBT) collision…
We experimentally explore pressure-driven flow of water and n-hexane across nanoporous silica (Vycor glass monoliths with 7 or 10 nm pore diameters, respectively) as a function of temperature and surface functionalization (native and…
We have developed a classical two- and three-body interaction potential to simulate the hydroxylated, natively oxidised Si surface in contact with water solutions, based on the combination and extension of the Stillinger-Weber potential and…