Related papers: Beamforming Techniques for Large-N Aperture Arrays
Wireless communication requires an effective antenna synthesis that characterizes adequate infrastructures to provide the broader bandwidth and reduced interference. Antenna design with minimal signal degradation, optimal gain directive…
The wide bandwidths offered at millimeter-wave (mmWave) frequencies have made them an attractive choice for future wireless communication systems. Recent works have presented beamforming strategies for enabling in-band full-duplex (FD)…
Hybrid analog and digital BeamForming (HBF) is one of the enabling transceiver technologies for millimeter Wave (mmWave) Multiple Input Multiple Output (MIMO) systems. This technology offers highly directional communication, which is able…
Distributed antennas must be phase-calibrated (phase-synchronized) for certain operations, such as reciprocity-based joint coherent downlink beamforming, to work. We use rigorous signal processing tools to analyze the accuracy of…
Reconfigurable antenna technology, such as movable antennas (MAs) and rotatable antennas (RAs), has emerged as a promising solution to enhance the communication performance of wireless systems by exploiting the new degree of freedom (DoF)…
Phased array feeds (PAFs) for reflector antennas offer the potential for increased reflector field of view and faster survey speeds. To address some of the development challenges that remain for scientifically useful PAFs, including…
This paper investigates the design of analog beamforming at the receiver in millimeter-wave (mmWave) multiple-input multiple-output (MIMO) systems, aided by full digital chains featuring 1-bit ADCs. We advocate utilizing these full digital…
Rydberg atomic quantum receivers have been seen as novel radio frequency measurements and the high sensitivity to a large range of frequencies makes it attractive for communications reception. However, current implementations of Rydberg…
Beamformers often trade off white noise gain against the ability to suppress interferers. With distributed microphone arrays, this trade-off becomes crucial as different arrays capture vastly different magnitude and phase differences for…
Medium-scale or large-scale receive antenna array with digital beamforming can be employed at receiver to make a significant interference reduction, but leads to expensive cost and high complexity of the RF-chain circuit. To deal with this…
We consider a full-duplex (FD) decode-and-forward system in which the time-switching protocol is employed by the multi-antenna relay to receive energy from the source and transmit information to the destination. The instantaneous throughput…
The natural integration of extremely large antenna arrays (ELAAs) and terahertz (THz) communications can potentially achieve Tbps data rates in 6G networks. However, due to the extremely large array aperture and wide bandwidth, a new…
Hybrid beamforming (HBF) and antenna selection are promising techniques for improving the energy efficiency~(EE) of massive multiple-input multiple-output~(mMIMO) systems. However, the transmitter architecture may contain several parameters…
A novel fully-connected (FC) tri-hybrid beamforming (THB) architecture is proposed for pinching antenna systems (PASS). In contrast to conventional sub-connected (SC) PASS, the proposed FC architecture employs a tunable phase-shifter…
In modern applications multi-sensor arrays are subject to an ever-present demand to accommodate signals with higher bandwidths. Standard methods for broadband beamforming, namely digital beamforming and true-time delay, are difficult and…
Millimeter wave (mmWave) systems will likely employ large antenna arrays at both the transmitters and receivers. A natural application of antenna arrays is simultaneous transmission to multiple users, which requires multi-user precoding at…
Switch-based hybrid network is a promising implementation for beamforming in large-scale millimetre wave (mmWave) antenna arrays. By fully exploiting the sparse nature of the mmWave channel, such hybrid beamforming reduces complexity and…
Millimeter-wave (mmWave) hybrid analog-digital beamforming is a promising approach to satisfy the low-latency constraint in multiple unmanned aerial vehicles (UAVs) systems, which serve as network infrastructure for flexible deployment.…
Joint radar-communications (JRC) benefits from multi-functionality of radar and communication operations using same hardware and radio frequency (RF) spectrum resources. Thus JRC systems possess very high potential to be employed into the…
In this paper we study the spectral efficiency (SE) of a point-to-point massive multiple-input multiple-output system (P2P-massive MIMO) with limited radio frequency (RF) chains, i.e., analog-to-digital/ digital-to-analog (D2A/A2D) modules,…