Related papers: Superposition of Inductive and Capacitive Coupling…
We present an ultrastrong superinductor-based coupling consisting of a flux qubit galvanically coupled to a resonator. The coupling inductor is fabricated in granular Aluminum, a superinductor material able to provide large surface…
In this article we present an experimental study of microwave resonators made out of Josephson junctions. The junctions are embedded in a transmission line geometry so that they increase the inductance per length for the line. By comparing…
Superconducting resonators provide a convenient way to measure loss tangents of various dielectrics at low temperature. For the purpose of examining the microscopic loss mechanisms in dielectrics, precise measurements of the internal…
We have fabricated and investigated a stacked two-chip device, consisting of a lumped element resonator on one chip, which is side-coupled to a coplanar waveguide transmission line on a second chip. We present a full model to predict the…
We demonstrate a simple and versatile resonator design based on a short strip of a typical coplanar waveguide shorted at one end to the ground and shunted at the other end with a large parallel-plate capacitor. Due to the shape of the…
We present a method to systematically locate and extract capacitive and inductive losses in superconducting resonators at microwave frequencies by use of mixed-material, lumped element devices. In these devices, ultra-low loss titanium…
This thesis is set in the framework of superconducting transmon-type qubit architectures with special focus on two important types of coupling between qubits and harmonic resonators: transverse and longitudinal coupling. We will see that…
Low-loss microwave components are used in many superconducting resonant circuits from multiplexed readouts of low-temperature detector arrays to quantum bits. Two-level system defects in amorphous dielectric materials cause excess energy…
Compact inductor-capacitor (LC) resonators, in contrast to coplanar waveguide (CPW) resonators, have a simple lumped-element circuit representation but usually call for sophisticated finite-element method (FEM) simulations for an accurate…
We present a unified approach for designing a diverse range of superconducting non-reciprocal components, including circulators, isolators, and uni-directional amplifiers, based on temporally-modulated coupled resonator networks. Our method…
We address the scaling-up problem for superconducting quantum circuits by using lumped-element resonators based on an alternative fabrication method of aluminum -- aluminum oxide -- aluminum ($\mathrm{Al/AlO_x/Al}$) parallel-plate…
We have designed and fabricated superconducting coplanar waveguide resonators with fundamental frequencies from 2 to $9 \rm{GHz}$ and loaded quality factors ranging from a few hundreds to a several hundred thousands reached at temperatures…
Increasing the density of superconducting circuits requires compact components, however, superconductor-based capacitors typically perform worse as dimensions are reduced due to loss at surfaces and interfaces. Here, parallel plate…
We have fabricated superconducting microwave resonators in a lumped element geometry using single crystal silicon dielectric parallel plate capacitors with C >2 pF. Aluminum devices with resonant frequencies between 4.0 and 6.5 GHz…
Modular architectures are a promising route toward scalable superconducting quantum processors, but finite fabrication yield and the lack of high quality temporary interconnects impose fundamental limitations on system size. Here, we…
Fabrication processes involving anhydrous hydrofluoric vapor etching are developed to create high-$Q$ aluminum superconducting microwave resonators on free-standing silicon membranes formed from a silicon-on-insulator wafer. Using this…
We describe the design and characterization of superconducting coplanar waveguide cavities tailored to facilitate strong coupling between superconducting quantum circuits and single trapped Rydberg atoms. For initial superconductor-atom…
Superconducting metamaterials are a promising resource for quantum information science. In the context of circuit QED, they provide a means to engineer on-chip, novel dispersion relations and a band structure that could ultimately be…
Superconducting enclosures will be key components of scalable quantum computing devices based on circuit quantum electrodynamics (cQED). Within a densely integrated device, they can protect qubits from noise and serve as quantum memory…
We design and fabricate two types of superconducting niobium coplanar waveguide microwave resonators with different coupling capacitors on high purity Si substrates. Their microwave transmissions are measured at the temperatures of 20 mK.…