Related papers: Analysis of the manufacturing variation in a coupl…
A system of three coupled toroidal microresonators arranged in a loop configuration is studied. This setup allows light entering the resonator setup from a tapered fiber to evolve along a variety of different pathways before leaving again…
We derived simple polynomial equations to determine the entire resonance spectra of split ring structures. For double stacking split rings made with flat wires, we showed that the resonance frequency depends linearly on the ring-ring…
Small-size acoustic arrays exploit spatial diversity to achieve capabilities beyond those of single-element devices, with applications ranging from teleconferencing to immersive multimedia. A key requirement for broadband array processing…
We perform nanosecond-resolution multiplexed readout on six same-chip superconducting microwave resonators. This allows us to pinpoint the impact positions of ionizing radiation on the chip by measuring the differential time of flight of…
Errors or failures in a high-volume manufacturing environment can have significant impact that can result in both the loss of time and money. Identifying such failures early has been a top priority for manufacturing industries and various…
Over the past few years, microelectromechanical system (MEMS) based on-chip resonators have shown significant potential for sensing and high frequency signal processing applications. This is due to their excellent features like small size,…
We theoretically investigate an ultrastrongly-coupled micromaser based on Rydberg atoms interacting with a superconducting LC resonator, where the common rotating-wave approximation and slowly-varying-envelope approximation are no longer…
Shape effects in magnetic particles are widely studied, because of the ability of the shape and the size to control the parameters of a sample during its production. Experiments with nano-sized samples show that the shape can affect also…
Coupling between optical microresonators and waveguides is a critical characteristic of resonant photonic devices with complex behavior that is not well understood. When the characteristic variation length of the microresonator modes is…
In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting…
Planar superconducting microwave transmission line resonators can be operated at multiple harmonic resonance frequencies. This allows covering wide spectral regimes with high sensitivity, as it is desired e.g. for cryogenic microwave…
The resonator is one of the main building blocks of a plethora of photonic and microwave devices from nanolasers to compact biosensors and magnetic resonance scanners. The symmetry of the resonators is tightly related to their mode…
The paper deals with the problem of controlling the state of industrial devices according to the readings of their sensors. The current methods rely on one approach to feature extraction in which the prediction occurs. We proposed a…
We present a high-sensitivity measurement technique for mechanical nanoresonators. Due to intrinsic nonlinear effects, different flexural modes of a nanobeam can be coupled while driving each of them on resonance. This mode-coupling scheme…
We report on fabrication of a microtoroid resonator of high-quality (high-Q) factor integrated with an on-chip microheater. Both the microresonator and microheater are fabricated using femtosecond laser three-dimensional (3D)…
High quality factor ($Q$) nanomechanical resonators have received a lot of attention for sensor applications with unprecedented sensitivity. Despite the large interest, few investigations into the frequency stability of high-$Q$ resonators…
The dynamical backaction from a periodically driven optical or microwave cavity can reduce the damping of a mechanical resonator, leading to parametric instability accompanied by self-sustained oscillations. Fundamentally, the driving…
We present a numerical study of the electromagnetic response of the metamaterial elements that are usedto construct materials with negative refractive index. For an array of split ring resonators (SRR) we find that the resonant behavior of…
We study theoretically dynamics in a Josephson junction coupled to a mechanical resonator looking at the signatures of the resonance in d.c. electrical response of the junction. Such a system can be realized experimentally as a suspended…
We investigate the FMR characteristics of a magnetic dimer composed of two chains of iron nanoparticles coupled by dipolar interactions. The latter are treated beyond the point-dipole approximation taking into account the finite size and…