Related papers: Pulse-to-pulse Beam Modulation and Event-based Bea…

The Fermilab Linac delivers 400 MeV H- beam to the rest of the accelerator chain. Providing stable intensity, energy, and emittance is key since it directly affects downstream machines. To operate high current beam, accelerators must…

The Fermilab Booster is being upgraded under the Proton Improvement Plan (PIP) to be capable of providing a proton flux of $2.25^{17}$ protons per hour. The intensity per cycle will remain at the present operational $4.3^{12}$ protons per…

High gradient accelerator injectors have been widely studied throughout the world-leading accelerator facilities. The demand for high frequency cavities have led the Detector, Accelerator and instrumentation laboratory (KAHVELab) in…

A fully digital beam position and phase measurement (BPPM) system was designed for the linear accelerator (LINAC) in Accelerator Driven Sub-critical System (ADS) in China. Phase information is obtained from the summed signals from four…

A 52MHz Radio Frequency Quadrupole (RFQ) linear accelerator (linac) is designed to serve as an initial structure for the SSC-linac system (injector into Separated Sector Cyclotron). The designed injection and output energy are 3.5 keV/u and…

We demonstrate a hybrid distributed fiber sensing system for multi-parameter detection. The integration of phase-sensitive optical time domain reflectometry ({\Phi}-OTDR) and Brillouin optical time domain reflectometry (B-OTDR) enables…

The power supply studies for the four-horn system for the CERN to Fr\'ejus neutrino Super Beam oscillation experiment are discussed here. The power supply is being studied to meet the physics potential and the mega-watt (MW) power…

Slow positrons are increasingly important to the study of material surfaces. For these kinds of studies, the positrons must have low emittance and relatively high brightness. Unfortunately, fast positron sources like radioactive capsules or…

Ultra-high dose rate electron sources require dose rate independent dosimeters and a calibrated dose control system for accurate delivery. In this study, we developed a single-pulse dose monitoring and a real-time dose-based control system…

The J-PARC Main Ring (MR) has achieved the delivery of the 30 GeV proton beam with the beam power of 500 kW to the neutrino experiment in May 2018. The longitudinal coupled-bunch instabilities have been observed in the MR for the beam power…

We report a systematic investigation into the processes behind a near hundredfold enhanced second harmonic wave generated from a laser-induced air plasma, by examining the temporal dynamics of the frequency conversion processes, and the…

The current program at Fermilab involves the construction of a new superconducting linear accelerator (LINAC) to replace the existing warm version. The new LINAC, together with other planned improvements, is in support of proton beam…

A novel approach for positron injection and acceleration in laser driven plasma wakefield is proposed. A theoretical model is developed and confirmed through PIC simulation. One ring-shaped beam and one co-axially propagating Gaussian beam…

The beam position monitor (BPM) system for Fermilab Switchyard (SY) provides the position, intensity and integrated intensity of the 53.10348 MHz RF bunched resonant extracted beam from the Main Injector over 4 seconds of spill. The total…

Beam monitoring is crucial for particle accelerators to achieve high luminosity. We describe an upgrade of the LABM, a beam monitoring device utilizing observation of the beamstrahlung, radiation emitted by a beam of charged particles when…

Laser plasma acceleration at kilohertz repetition rate has recently been shown to work in two different regimes, with pulse lengths of either 30 fs or 3.5 fs. We now report on a systematic study in which a large range of pulse durations and…

The Fermilab Booster uses multi-turn beam injection with all its cavities phased such that beam sees a net zero RF voltage even when each station is at the same maxi-mum voltage. During beam capture the RF voltage is increased slowly by…

For the PIP-II program, transverse emittance in the Fermilab Booster must remain well controlled at higher bunch intensities. 4-plate beam position monitors (BPMs) have a small but measurable quadrupole moment, making it possible to infer…

Positron acceleration in plasma wakefield faces significant challenges since the positron beam must be pre-generated and precisely coupled into the wakefield, and most critically, suffers from defocusing issues. Here we propose a scheme…

We report on an injection feedback scheme for the ThomX storage ring project. ThomX is a 50-MeV-electron accelerator prototype which will use Compton backscattering in a storage ring to generate a high flux of hard X-rays. Given the slow…