Related papers: Reduced frequency noise in superconducting resonat…
We systematically study the performance of compact lumped element planar microwave $\mathrm{Nb_{70}Ti_{30}N}$ (NbTiN) resonators operating at 5 GHz in external in-plane magnetic fields up to 440 mT, a broad temperature regime from 2.2 K up…
We experimentally investigate superconducting coplanar waveguide resonators in external magnetic fields and present two strategies to reduce field-induced dissipation channels and resonance frequency shifts. One of our approaches is to…
Suspending devices on thin SiN membranes can limit their interaction with the bulk substrate and reduce parasitic capacitance to ground. While suspending devices on membranes is used in many fields including radiation detection using…
We have investigated low-frequency 1/f noise in the boron nitride - grapheme - boron nitride heterostructure field - effect transistors on Si/SiO2 substrates (f is a frequency). The device channel was implemented with a single layer…
We designed and successfully fabricated an absorption-type of superconducting coplanar waveguide (CPW) resonators. The resonators are made from a Niobium film (about 160 nm thick) on a high-resistance Si substrate, and each resonator is…
Millimeter-wave superconducting resonators are a useful tool for studying quantum device coherence in a new frequency domain. However, improving resonators is difficult without a robust and reliable method for coupling millimeter-wave…
Advancements in the fabrication of superconducting quantum devices have highlighted tantalum as a promising material, owing to its low surface oxidation microwave loss at low temperatures. However, tantalum films exhibit significantly…
Quantum bits (qubits) with long coherence times are an important element for the implementation of medium- and large-scale quantum computers. In the case of superconducting planar qubits, understanding and improving qubits' quality can be…
Frequency instability of superconducting resonators and qubits leads to dephasing and time-varying energy-loss and hinders quantum-processor tune-up. Its main source is dielectric noise originating in surface oxides. Thorough noise studies…
The loss in superconducting microwave resonators at low-photon number and low temperatures is not well understood but has implications for achievable coherence times in superconducting qubits. We have fabricated single-layer resonators with…
Noise performance is one of the most crucial aspects of any detector. Superconducting Microwave Kinetic Inductance Detectors (MKIDs) have an "excess" frequency noise that shows up as a small time dependent jitter of the resonance frequency…
We characterize low-loss electron-beam evaporated niobium thin films deposited under ultra-high vacuum conditions. Slow deposition yields films with a high superconducting transition temperature ($9.20 \pm 0.06 \rm ~K$) as well as a…
We describe the measurement and modeling of amplitude noise and phase noise in ultra-high Q nanomechanical resonators made from stoichiometric silicon nitride. With quality factors exceeding 2 million, the resonators' noise performance is…
A microwave kinetic inductance detector (MKID) is a cutting-edge superconducting detector. It comprises a resonator circuit constructed with a superconducting film on a dielectric substrate. To expand its field of application, it is…
We have investigated the low frequency (f) flicker (also called 1/f) noise of single-layer graphene devices on h-BN (placed on SiO2/Si) along with those on SiO2/Si. We observe that the devices fabricated on h-BN have on average one order of…
We have designed and fabricated superconducting coplanar waveguide resonators with fundamental frequencies from 2 to $9 \rm{GHz}$ and loaded quality factors ranging from a few hundreds to a several hundred thousands reached at temperatures…
Separating the influence of hyperfine from spin-orbit interactions in spin-dependent carrier recombination and dissociation processes necessitates magnetic resonance spectroscopy over a wide range of frequencies. We have designed compact…
Niobium nitride (NbN) is a particularly promising material for quantum technology applications, as entails the degree of reproducibility necessary for large-scale of superconducting circuits. We demonstrate that resonators based on NbN thin…
We present fast tunable superconducting microwave resonators fabricated from planar NbN on a sapphire substrate. The $3\lambda/4$ wavelength resonators are tuning fork shaped and tuned by passing a dc current which controls the kinetic…
Surface acoustic waves (SAWs), with their five orders-of-magnitude slower propagation velocity, allow for considerably shorter wavelengths at the same frequency compared to electromagnetic waves. The short wavelengths allow for device…