Related papers: Single shot emittance measurement using Optical Tr…
Aberration-corrected Scanning Transmission Electron Microscopy (STEM) has become an essential tool in understanding materials at the atomic scale. However, tuning the aberration corrector to produce a sub-{\AA}ngstr\"om probe is a complex…
The pepper-pot method is a widely used technique, originally proposed for measuring the emittance of space-charge-dominated electron beams from radio-frequency photoinjectors. With recent advances in producing high-brightness electron beams…
An interferometer system and an imaging system using visible synchrotron radiation (SR) have been installed in HLS II storage ring. Simulations of these two systems are given using Synchrotron Radiation Workshop(SRW) code. With these two…
The solenoid scan is one of the most common methods for the in-situ measurement of the thermal emittance of a photocathode in an rf photoinjector. The fringe field of the solenoid overlaps with the gun rf field in quite a number of…
Evanescent waves are central to many technologies such as near-field imaging that beats the diffraction limit and plasmonic devices. Frustrated total internal reflection (FTIR) is an experimental method commonly used to study evanescent…
A superconducting radio-frequency (SRF) photo injector is in operation at the electron linac for beams with high brilliance and low emittance (ELBE) radiation center and generates continuous wave (CW) electron beams with high average…
A beam-energy-spread monitor is under development in order to control and stabilize the energy spread of high-current single-bunch electron beams for producing a sufficient number of positrons. The author has proposed a new monitor using…
We have designed and implemented an experiment to measure the angular distributions and the energy spectra of the transition radiation X-rays emitted by fast electrons and positrons crossing different radiators. Our experiment was selected…
We use 429 fb$^{-1}$ of $e^+e^-$ collision data collected at the $\Upsilon(4S)$ resonance with the BABAR detector to measure the radiative transition rate of $b\rightarrow s\gamma$ with a sum of 38 exclusive final states. The inclusive…
We describe use of the Advanced Photon Source (APS) rf thermionic gun, alpha magnet beamline, and linac to produce a stable high-brightness beam in excess of 100 amperes peak current with normalized emittance of 10 pi mm-mrad. To obtain…
We present design and realization of an ultra-broadband optical spectrometer capable of measuring the spectral intensity of multi-octave-spanning light sources on a single-pulse basis with a dynamic range of up to 8 orders of magnitude. The…
The vertical plane transverse emittance of accelerated electron bunches at the AWAKE experiment at CERN has been determined, using three different methods of data analysis. This is a proof-of-principle measurement using the existing AWAKE…
In its normal mode of operation the Argonne Wakefield Accelerator Facility uses a high charge (10-100 nC), short pulse (3-5 psec) drive bunch to excite high-gradient accelerating fields in various slow-wave structures. To generate this…
2D and 4D transverse phase-space of a low-energy ion-beam is measured with two of the most common emittance scanners. The article covers the description of the installation, the setup, the settings, the experiment and the benchmark of the…
An ensemble of atoms in steady-state, whether in thermal equilibrium or not, has a well defined energy distribution. Since the energy of single atoms within the ensemble cannot be individually measured, energy distributions are typically…
X-ray transition radiation can be used to measure the Lorentz factor of relativistic particles. At energies approaching gamma = E/mc^2 = 10^5, transition radiation detectors (TRDs) can be optimized by using thick (sim 5 - 10 mil) foils with…
The wire scanners are used for a measurement of the very small beam size and the emittance in Accelerator Test Facility (ATF). They are installed in the extraction beam line of ATF damping ring. The extracted beam emittance are ex=1.3x10-9…
For synchrotron light sources, the brightness of user X-ray beams is primarily determined by the electron beam emittance and energy spread at operational intensity. A common feature of fourth-generation synchrotrons is the short length of…
Estimation of the properties of a physical system with minimal uncertainty is a central task in quantum metrology. Optical phase estimation is at the center of many metrological tasks where the value of a physical parameter is mapped to the…
The uncertainty of the energy measurement of the electron beam on circular electron positron collider (CEPC) must be smaller than 10$\mathrm{MeV}$ to make sure the accurate measurement of the mass of the Higgs boson. In order to simplify…