Related papers: Simple piezoelectric-actuated mirror with 180 kHz …
The cable capacitance in cryogenic and high vacuum applications of quartz tuning forks imposes severe constraints on the bandwidth and noise performance of the measurement. We present a single stage low noise transimpedance amplifier with a…
Multilayer piezoelectric polyvinylidene fluoride (PVDF) actuators are a promising approach to enhance performance of soft microrobotic systems. In this work, we develop and characterize multilayer PVDF actuators with parallel voltage…
Tuning and reconfiguring nanophotonic components is needed to realize systems incorporating many components. The electrostatic force can deform a structure and tune its optical response. Despite the success of electrostatic actuators, they…
We use a piezoelectric quartz tuning fork to calibrate the displacement of ceramic piezoelectric scanners which are widely employed in scanning probe microscopy. We measure the static piezoelectric response of a quartz tuning fork and find…
Here we present an efficient, visible-light, gigahertz-frequency acousto-optic modulator fabricated on a 200 mm wafer in a volume CMOS foundry. Our device combines a piezoelectric transducer and a photonic waveguide within a single…
We describe and experimentally evaluate a stabilized radio-frequency transfer technique that employs optical phase sensing and optical phase actuation. This technique can be achieved by modifying existing stabilized optical frequency…
The development and characterisation of a piezoelectric actuated high-frequency MEMS scanning mirror with on-chip frequency tuning capability is reported. The resonant scanner operates at frequencies in excess of 140 kHz, generating scan…
The present work aims to enhance the electrostrictive strain of the P(VDF-TrFE-CFE) terpolymer for use in adaptive optics, specifically in deformable mirror actuation. In the context of the FlexSiMirror project, these systems seek to…
Acoustic wave devices provide a promising chip-scale platform for efficiently coupling radio frequency (RF) and optical fields. Here, we use an integrated piezo-optomechanical circuit platform that exploits both the piezoelectric and…
Advancements in high-efficiency hybrid variable reluctance (HVR) actuators are an enabling technology for building the next generation of large-format deformable mirrors, including adaptive secondary mirrors. The Netherlands Organization…
We describe a general purpose digital servo optimized for feedback control of lasers in atomic, molecular, and optical (AMO) physics experiments. The servo is capable of feedback bandwidths up to roughly 1~MHz (limited by the 320~ns total…
An opto--electro--mechanical system formed by a nanomembrane capacitively coupled to an LC resonator and to an optical interferometer has been recently employed for the high--sensitive optical readout of radio frequency (RF) signals [T.…
We present a piezoelectric transducer in thin-film lithium niobate that converts a 1.7 GHz microwave signal to a mechanical wave in a single mode of a 1 micron-wide waveguide. We measure a -12 dB conversion efficiency that is limited by…
We present an ultra-low noise, high-voltage driver suited for use with piezoelectric actuators and other low-current applications. The architecture uses a flyback switching regulator to generate up to 250V in our current design, with an…
We present a cavity piezo-optomechanical system where microwave and optical degrees of freedom are coupled through an ultra-high frequency mechanical resonator. By utilizing the coherence among the three interacting modes, we demonstrate…
We present an inexpensive, low-noise ($<260~\mu$V$_{rms}$, 0.1~Hz - 100~kHz) design for a piezo driver suitable for frequency tuning of external-cavity diode lasers. This simple driver improves upon many commercially available drivers by…
We measure the motional fluctuations of a micromechanical mirror using a Michelson interferometer, and demonstrate its interferometric stability. The position stability of the micromirror is dominated by the thermal mechanical noise of the…
A modified conventional three-transducer reciprocity calibration method is used to measure the magnitude and phase responses of the transmitting voltage response and the free-field open-circuit receiving voltage sensitivity of ultrasonic…
Piezoelectricity is a technologically important property of certain insulators in which mechanical strain induces an electrical polarization. However, the rate at which a piezoelectric response can be established over a macroscopic volume…
A piezoelectric voltage coupled microwave reentrant cavity has been developed. The central cavity post is bonded to a piezoelectric actuator allowing the voltage control of small post displacements over a high dynamic range. We show that…