Related papers: RETGEM with polyvinylchloride (PVC) electrodes
We report the performance of a 10 atm Xenon/trimethylamine time projection chamber (TPC) for the detection of X-rays (30 keV) and gamma-rays (0.511-1.275 MeV) in conjunction with the accurate tracking of the associated electrons. When…
Resistive Random Access Memory (ReRAM) based Processing In Memory (PIM) Accelerator has emerged as a promising computing architecture for memory intensive applications, such as Deep Neural Networks (DNNs). However, due to its immaturity,…
Performances of several single gap (gas gap 2 mm) prototype Resistive Plate Chambers (RPC) made of high resistive ({\rho} \sim 1010 - 1012 {\Omega} cm) bakelite, commercially available in India have been studied in recent times. To make the…
A Time Projection Chamber (TPC) is an ideal device for the detection of charged particle tracks in a large volume covering a solid angle of almost $4\pi$. The high density of hits on a given particle track facilitates the task of pattern…
The concept of a hybrid readout of a time projection chamber is presented. It combines a GEM-based amplification and a pad-based anode plane with a pixel chip as readout electronics. This way, a high granularity enabling to identify…
The recently completed Forward GEM Tracker (FGT) of the STAR experiment at RHIC took advantage of commercially produced GEM foils based on double-mask chemical etching techniques. With future experiments proposing detectors that utilize…
Resistive Plate Chambers (RPCs) featuring 1 mm gas volumes combined with high-pressure phenolic laminate (HPL) electrodes provide excellent timing resolution down to a few hundred picoseconds, along with spatial resolution on the order of a…
In view of a possible application as a charge-particle track readout for an Active-Target Time Projection Chamber (AT-TPC), the operational properties and performances of a hybrid Micro-Pattern Gaseous Detector (MPGD) were investigated in…
Electrochemical random-access memory (ECRAM) is a recently developed and highly promising analog resistive memory element for in-memory computing. One longstanding challenge of ECRAM is attaining retention time beyond a few hours. This…
An extremely efficient ethanol fuel cell electrode is produced by combining the large surface area of vertically oriented and highly conductive few-layer graphene sheets with electrochemically deposited palladium nanoparticles. The…
A simple X-ray imaging system using off-the-shelf electronics and simple reconstruction algorithms aiming a spatial resolution of 1.7 mm ($\sim 3\,\%$ of the detector length) is described in this work. For this, two 100 cm$^2$ Gas Electron…
Gas electron multipliers (GEMs) with wire (WGEMs) or metal electrodes (MGEMs), which don't use any plastic insulators between electrodes are created. The chambers containing MGEMs (WGEMs) with pin-anodes are proposed as detectors for…
We present a new technology for the shaping of the electric field in Time Projection Chambers (TPCs) using a carbon-loaded polyimide foil. This technology allows for the minimisation of passive material near the active volume of the TPC and…
The splitting of water with sunlight using photoelectrochemical cell (PEC) to produce hydrogen is a promising avenue for sustainable energy production. The greatest virtue of PEC is that it uses sunlight as the only source to split water,…
We report on the design of a new type of electron gun to be used for experiments of infrared emission spectroscopy of rare gas excimers. It is based on a filament heated by means of a pack of rechargeable batteries floated atop the…
In MicroPattern Gas Detectors (MPGD) when the pixel size is below 100 micron and the number of pixels is large (above 1000) it is virtually impossible to use the conventional PCB read-out approach to bring the signal charge from the…
The Gas Electron Multiplier (GEM) detector is one of promising particle and radiation detectors that has been improved greatly from previous gas detectors. The improvement includes better spatial resolutions, higher detection rate…
This paper presents the study on the characterization of glass electrodes, which are one of the main components of detectors like Resistive Plate Chambers (RPCs). The RPCs are being used in various ongoing High Energy Physics experiments,…
Cerenkov technology is often the optimal choice for particle identification in high energy particle collision applications. Typically, the most challenging regime is at high pseudorapidity (forward) where particle identification must…
The Controlled Source Electromagnetic (CSEM) method aims to image electrical resistivity at intermediate depths (0-3 km) for geothermal, mineral, and groundwater exploration. It was developed both as a deeper extension of DC resistivity…