Related papers: Hybrid, Optical and Wireless Near-Gigabit Communic…
This paper presents the design and the realization of a hybrid wireless Gigabit Ethernet indoor communications system operating at 60 GHz. As the 60 GHz radio link operates only in a single-room configuration, an additional Radio over Fiber…
This paper presents the realization of a wireless Gigabit Ethernet communication system operating in the 60 GHz band. The system architecture uses a single carrier modulation. A differential encoded binary phase shift keying modulation and…
A 60 GHz wireless Gigabit Ethernet (G.E.) communication system is developed at IETR. As the 60 GHz radio link operates only in a single-room configuration, an additional Radio over Fibre (RoF) link is used to ensure the communications in…
This paper presents the study and the realization at IETR of a high data rate 60 GHz wireless communications system. The system uses a simple single carrier architecture. The receiver architecture is based on a differential demodulation…
This paper proposes a complete IFoF system architecture derived from simplified IEEE802.15.3c PHY layer proposal to successfully ensure near 1 Gbps on the air interface. The system architecture utilizes low complexity baseband processing…
A 60 GHz wireless Gigabit Ethernet (G.E.) communication system capable of near gigabit data rate has been developed at IETR. The realized system covers 2 GHz available bandwidth. This paper describes the design and realization of the…
Given the high throughput requirement for 5G, merging millimeter wave technologies and multi-user MIMO seems a very promising strategy. As hardware limitations impede to realize a full digital architecture, hybrid MIMO architectures, using…
The next 5 th generation (5G) and above ultra-high speed, ultra-low latency, and extremely high reliable communication systems will consist of heterogeneous networks. These heterogeneous networks will consist not only radio frequency (RF)…
This paper presents a brief overview of several studies concerning the indoor wireless communications at 60 GHz performed by the IETR. The characterization and the modeling of the radio propagation channel are based on several measurement…
With the wireless internet access being increasingly popular with services such as HD video streaming and so on, the demand for high data consuming applications is also rising. This increment in demand is coupled with a proportional rise in…
In mobile communication system, due to the limitations of mobile device such as low power supply as well as small size, most of the processing should be done at the Base Station. Using multi-receive structure at the Base Station really…
We propose a hybrid architecture that integrates RF (i.e., sub-6 GHz) and millimeter wave (mmWave) technologies for 5G cellular systems. In particular, communications in the mmWave band faces significant challenges due to variable channels,…
Hybrid analog-digital precoding is a key millimeter wave access technology, where an antenna array with reduced number of radio frequency (RF) chains is used with an RF precoding matrix to increase antenna gain at a reasonable cost.…
In this paper we describe the status of the first prototype of the 60 GHz wireless Multi-gigabit data transfer topology currently under development at University of Heidelberg using IBM 130 nm SiGe HBT BiCMOS technology. The 60 GHz band is…
Communications based solely on radio frequency (RF) networks cannot provide adequate quality of service for the rapidly growing demands of wireless connectivity. Since devices operating in the optical spectrum do not interfere with those…
In this paper a novel multi-hop relay-assisted hybrid Free Space Optical / Radio Frequency (FSO / RF) communication system is presented, in which a mobile user is connected to the Base Station via a multi-hop relay-assisted hybrid FSO / RF…
The hybrid relay selection (HRS) scheme, which adaptively chooses amplify-and-forward (AF) and decode-and-forward (DF) protocols, is very effective to achieve robust performance in wireless networks. This paper analyzes the frame error rate…
Modern wireless communication networks, particularly cellular networks utilize multiple antennas to improve the capacity and signal coverage. In these systems, typically an active transceiver is connected to each antenna. However, this…
This paper studies energy-efficient hybrid beamforming architectures and its algorithm design in millimeter-wave communication systems, aiming to address the challenges faced by existing hybrid beamforming due to low hardware flexibility…
This paper presents the design and the realization of a 60 GHz wireless Gigabit Ethernet communication system. A differential encoded binary phase shift keying modulation (DBPSK) and differential demodulation schemes are adopted for the IF…