Related papers: Self-referenced characterization of optical freque…
Comb-mode resolved spectral domain interferometry (CORE-SDI), which is capable of measuring length of kilometers or more with precision on the order of nanometers, is considered to be a promising technology for next-generation length…
We propose a direct and real-time ranging scheme using an optical frequency combs, able to compensate optically for index of refraction variations due to atmospheric parameters. This scheme could be useful for applications requiring…
The counting and control of optical cycles of light has become common with modelocked laser frequency combs. But even with advances in laser technology, modelocked laser combs remain bulk-component devices that are hand-assembled. In…
Optical frequency-comb-based-high-resolution spectrometers offer enormous potential for spectroscopic applications. Although various implementations have been demonstrated, the lack of suitable mid-infrared comb sources has impeded…
We designed and built an adjustable repetition rate optical frequency comb using off-the-shelf components with several improvements to an established erbium fiber design. This design, built fully by an undergraduate, was assembled at a…
This study proposes and demonstrates a versatile method for near and mid-infrared optical frequency comb generation using multi-seeded femtosecond optical parametric generation. The method allows one to divide the repetition rate by an…
We report an all-polarization-maintaining fiber optic approach to generating sub-2 cycle pulses at 2 {\mu}m and a corresponding octave-spanning optical frequency comb. Our configuration leverages mature Er:fiber laser technology at 1.5…
Despite the multitude of available methods, the characterisation of ultrafast pulses remains a challenging endeavour, especially at the single-photon level. We introduce a pulse characterisation scheme that maps the magnitude of its…
We present gapless, high-resolution absorption and dispersion spectra obtained with quantum cascade laser frequency combs covering 55 cm$^{-1}$. Using phase-sensitive dual comb design, the comb lines are gradually swept over 10 GHz,…
Optical-frequency synthesizers are lasers stabilized and programmed from a microwave clock for applications, especially in fundamental measurements and spectroscopy, optical-communication links, and precision sensing of numerous physical…
Optical frequency combs can potentially provide an efficient light source for multi-terabit-per-second optical superchannels. However, as the bandwidth of these multi-wavelength light sources is increased, it can result in low per-line…
Using a turn-key Ti:sapphire femtosecond laser frequency comb, an off-the-shelf supercontinuum device, and Fabry-Perot mode filters, we report the generation of a 16 GHz frequency comb spanning a 90 nm band about a center wavelength of 566…
We propose and study a method for measuring the chromatic dispersion parameter (D) of optical fibers and bulk optical elements through the use of a single-arm three-wave interferometer and a fiber femtosecond frequency comb (FFFC). The FFFC…
We present a hybrid fiber/waveguide design for a 100-MHz frequency comb that is fully self-referenced and temperature controlled with less than 5 W of electrical power. Self-referencing is achieved by supercontinuum generation in a silicon…
Development of the optical frequency comb has revolutionised metrology and precision spectroscopy due to its ability to provide a precise and direct link between microwave and optical frequencies. A novel application of frequency comb…
We have carried out dual-comb spectroscopy and observed in a simultaneous acquisition a 140-THz-wide spectrum from 1.0 to 1.9 {\mu}m using two fiber-based frequency combs phase-locked to each other. This ultra-broad wavelength bandwidth is…
We demonstrate a scheme, based on a cascade of lithium niobate intensity and phase modulators driven by specially tailored radio frequency waveforms to generate an optical frequency comb with very high spectral flatness. In this work we…
Tunable mid-infrared lasers are essential for optical sensing and imaging. Existing technologies, however, face challenges in simultaneously achieving broadband spectral tunability and ultra-rapid scan rates, limiting their utility in…
We demonstrate a self-referenced fiber frequency comb that can operate outside the well-controlled optical laboratory. The frequency comb has residual optical linewidths of < 1 Hz, sub-radian residual optical phase noise, and residual…
Low noise and high repetition rate optical frequency combs are desirable for many applications from timekeeping to precision spectroscopy. For example, gigahertz repetition rate sources greatly increase the acquisition speed of spectra in a…