Related papers: High resolution miniature dilatometer based on AFM…
The quantitative interatomic force measurements open a new pathway to materials characterization, surface science, and chemistry by elucidating the force between 'two' interacting atoms as a function of their separation. Atomic force…
We present a method of broadening the dynamic range of optical interferometric detection of cantilever displacement. The key idea of this system is to use a wavelength-tunable laser source. The wavelength is subject to proportional-integral…
Magnetic force microscopy (MFM) is a well-established technique in scanning probe microscopy that allows for the imaging of magnetic samples with a spatial resolution of tens of nm and stray fields down to the mT range. The spatial…
We describe a room-temperature alkali-metal atomic magnetometer for detection of small, high frequency magnetic fields. The magnetometer operates by detecting optical rotation due to the precession of an aligned ground state in the presence…
We present a "nanoladder" geometry that minimizes the mechanical dissipation of ultrasensitive cantilevers. A nanoladder cantilever consists of a lithographically patterned scaffold of rails and rungs with feature size $\sim$ 100 nm.…
We present a detailed modeling and characterization of our scalable microwave nanoprobe, which is a micro-fabricated cantilever-based scanning microwave probe with separated excitation and sensing electrodes. Using finite-element analysis,…
We describe the design and performance of a microwave polarimeter used to make precision measurements of polarized astrophysical radiation in three microwave frequency bands spanning 26-36 GHz. The instrument uses cooled HEMT amplifiers in…
: It goes without saying that at present MEMS Technology became one of the latest and emerging methods because of its miniaturization and effective cost. Now near the beginning recognition of disease became a major challenge in front of…
We present the first demonstration of an inertially sensitive atomic interferometer based on a continuous, rather than pulsed, atomic beam at sub-Doppler temperatures in three dimensions. We demonstrate 30\% fringe contrast in continuous,…
While piezoelectrics and ferroelectrics are playing a key role in many everyday applications, there are still a number of open questions related to the physics of those materials. In order to foster the understanding of piezoelectrics and…
The Transient Fluctuation Theorem is used to calibrate an Atomic Force Microscope by measuring the fluctuations of the work performed by a time dependent force applied between a collo{\"i}dal probe and the surface. From this measure one can…
We report the piezoresisitivity in magnetic thin films of FeGa and their use for fabricating self transducing microcantilevers. The actuation occurs as a consequence of both the ferromagnetic and magnetostrictive property of FeGa thin…
We have realized a microstrip based THz near field cantilever which enables quantitative measurements of the impedance of the probe tip at THz frequencies (0.3 THz). A key feature is the on-chip balanced hybrid coupler which serves as an…
We are developing an imaging polarimeter by combining a fine-pixel CMOS image sensor with a coded aperture mask as part of the cipher project, aiming to achieve X-ray polarimetry in the energy range of…
Atomic force microscopy (AFM) is widely used to measure surface topography of solid, soft, and living matter at the nanoscale. Moreover, by mapping forces as a function of distance to the surface, AFM can provide a wealth of information…
A commercially available calorimeter has been used to investigate the specific heat of a high-quality \kn\ single crystal. The addenda heat capacity of the calorimeter is determined in the temperature range $0.02 \, \mathrm{K} \leq T \leq…
Micromechanical transducers such as cantilevers for AFM often rely on optical readout methods that require illumination of a specific region of the microstructure. Here we explore and exploit the diffraction effects that have been…
The Thirty Meter Telescope will use a sophisticated adaptive optics system called NFIRAOS. This system utilizes two deformable mirrors conjugate to 0 km and 11.2 km to apply a Multi-Conjugate Adaptive Optics (MCAO) correction over a 2…
An interferometric method is implemented in order to accurately assess the thermal fluctuations of a micro-cantilever sensor in liquid environments. The power spectrum density (PSD) of thermal fluctuations together with Sader's model of the…
We report on measurements performed at low temperatures on a nanoelectromechanical system (NEMS) under (capacitive) parametric pumping. The excitations and detection schemes are purely electrical, and enable in the present experiment the…