Related papers: The PRIMA fringe sensor unit
The PRobe far-Infrared Mission for Astrophysics (PRIMA) is an infrared observatory for the next decade, currently in Phase A, with a 1.8m telescope actively cooled to 4.5K. On board, an infrared camera, PRIMAger, equipped with…
Silicon photonic wavefront phase-tilt sensors for wavefront monitoring using surface coupling grating arrays are demonstrated. The first design employs the intrinsic angle dependence of the grating coupling efficiency to determine local…
Point source atom interferometry (PSI) uses the velocity distribution in a cold atom cloud to simultaneously measure one axis of acceleration and two axes of rotation from the phase, orientation, and period of atomic interference fringe…
Fringe pattern based measurement techniques are the state-of-the-art in full-field optical metrology. They are crucial both in macroscale, e.g., fringe projection profilometry, and microscale, e.g., label-free quantitative phase microscopy.…
In this paper we present the first on-sky results with the fibered aperture masking instrument FIRST. Its principle relies on the combination of spatial filtering and aperture masking using single-mode fibers, a novel technique that is…
We describe the observing simulation software FISVI (FIS Virtual Instrument), which was developed for the Far-Infrared Surveyor (FIS) that will be on the Japanese infrared astronomy mission ASTRO-F. The FISVI has two purposes: one is to…
To enable optical long baseline interferometry toward faint objects, long integrations are necessary despite atmospheric turbulence. Fringe trackers are needed to stabilize the fringes and thus increase the fringe visibility and phase…
This tutorial gives a general introduction to optical and infrared interferometry, specifically addressing two questions: `Can I use VLTI to observe my favourite object?' and `What will it tell me?' The observables measured by an…
The Space Interferometry Mission (SIM) will observe sources in crowded fields. Recent work has shown that source crowding can induce significant positional errors in SIM's astrometric measurements, even for targets many magnitudes brighter…
WFIRST microlensing observations will return high-precision parallaxes, sigma(pi) < 0.3 microarcsec, for the roughly 1 million stars with H<14 in its 2.8 deg^2 field toward the Galactic bulge. Combined with its 40,000 epochs of high…
The full scientific potential of the VLTI with its second generation instruments MATISSE and GRAVITY require fringe tracking up to magnitudes K>14 with the UTs and K>10 with the ATs. The GRAVITY fringe tracker (FT) will be limited to K~10.5…
The Laser Interferometer Space Antenna (LISA) is being designed to detect and study in detail gravitational waves from sources throughout the Universe such as massive black hole binaries. The conceptual formulation of the LISA space-borne…
Visibility estimators and their performance are presented for use with the Palomar Testbed Interferometer (PTI). One operational mode of PTI is single-baseline visibility measurement using pathlength modulation with synchronous readout by a…
Fringe projection profilometry (FPP) has been established as a high-accuracy 3D reconstruction method capable of achieving sub-pixel accuracy. However, this technique faces significant constraints due to complex calibration requirements,…
Frequency domain multiplexing (FDM) is the baseline readout system for the X-ray Integral Field Unit (X-IFU) on board the Athena mission. Under the FDM scheme, TESs are coupled to a passive LC filter and biased with alternating current (AC…
The upgrade of the VLTI infrastructure for the 2nd generation instruments is now complete with the transformation of the laboratory, and installation of star separators on both the 1.8-m Auxiliary Telescopes (ATs) and the 8-m Unit…
The Big Fringe Telescope (BFT) is a facility concept under development for a next-generation, kilometer-scale optical interferometer. Observations over the past two decades from routinely operational facilities such as CHARA and VLTI have…
In a previous paper we described a method of estimating the single-measurement bias to be expected in astrometric observations of targets in crowded fields with the future Space Interferometry Mission (SIM). That study was based on a…
The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument of the Very Large Telescope Interferometer providing the ESO community with spectrally-resolved, near-infrared images at angular resolutions down to 1.1…
The crossed-sine wavefront sensor (WFS) is a pupil plane wavefront sensor that measures the first derivatives of the wavefront. It is made by three main components: a gradient transmission filter (GTF) built from a product of sine functions…