Related papers: Rapid reconstruction of 3D structure of fibrous me…
Pore network modelling has traditionally been used to study displacement processes in idealized porous media related to geological flows, with applications ranging from groundwater hydrology to enhanced oil recovery. Very recently, pore…
The dynamics of two-phase flow within the cathode of a proton exchange membrane fuel cell, particularly in Gas Diffusion Layers (GDLs) with varying fiber curvatures, remain underexplored. Using a periodic surface model, we stochastically…
A simple method of constructing the 3D surface of non-transparent micro-objects by extending the depth-of-field on the whole attainable surface is presented. The series of images of a sample are recorded by the sequential movement of the…
Note: The final version of this article was published in Computers and Geosciences, Volume 206, January 2026, 106038. DOI: 10.1016/j.cageo.2025.106038. Readers should refer to the published version for the most up-to-date content.…
To evaluate the variability of multi-phase flow properties of porous media at the pore scale, it is necessary to acquire a number of representative samples of the void-solid structure. While modern x-ray computer tomography has made it…
In many branches of earth sciences, the problem of rock study on the micro-level arises. However, a significant number of representative samples is not always feasible. Thus the problem of the generation of samples with similar properties…
Liquid water within the cathode Gas Diffusion Layer (GDL) and Gas Channel (GC) of Proton Exchange Membrane Fuel Cells (PEMFCs) is strongly coupled to gas transport properties, thereby affecting the electrochemical conversion rates. In this…
Conventional 2-D scanning electron microscopy (SEM) is commonly used to rapidly and qualitatively evaluate membrane pore structure. Quantitative 2-D analyses of pore sizes can be extracted from SEM, but without information about 3-D spatial…
This survey aims to investigate fundamental deep learning (DL) based 3D reconstruction techniques that produce photo-realistic 3D models and scenes, highlighting Neural Radiance Fields (NeRFs), Latent Diffusion Models (LDM), and 3D Gaussian…
Fluid flow through layered materials with different wetting behavior is observed in a wide range of applications in biological, environmental and technical systems. Therefore, it is necessary to understand the occuring transport mechanisms…
For improved operating conditions of a polymer electrolyte membrane (PEM) fuel cell, a sophisticated water management is crucial. Therefore, it is necessary to understand the transport mechanisms of water throughout the cell constituents…
3D Morphable Models (3DMMs) provide promising 3D face reconstructions in various applications. However, existing methods struggle to reconstruct faces with extreme expressions due to deficiencies in supervisory signals, such as sparse or…
Positron emission tomography (PET) reconstruction is a critical challenge in molecular imaging, often hampered by noise amplification, structural blurring, and detail loss due to sparse sampling and the ill-posed nature of inverse problems.…
Diffusion-based voxel prior modelling is challenging for the reconstruction of large-scale 3D porous microstructures. Due to the demanding requirements for simultaneously modelling both the continuous pore morphology and the discrete…
In this paper, we present a generalizable method for 3D surface reconstruction from raw point clouds or pre-estimated 3D Gaussians by 3DGS from RGB images. Unlike existing coordinate-based methods which are often computationally intensive…
Digital modeling of the microstructure is important for studying the physical and transport properties of porous media. Multiscale modeling for porous media can accurately characterize macro-pores and micro-pores in a large-FoV (field of…
The conversion of 2D freehand sketches into 3D models remains a pivotal challenge in computer vision, bridging the gap between fluent sketching and CAD. Traditional monocular depth reconstruction techniques are not suitable for line drawing…
Limited-angle electron tomography aims to reconstruct 3D shapes from 2D projections of Transmission Electron Microscopy (TEM) within a restricted range and number of tilting angles, but it suffers from the missing-wedge problem that causes…
We present a Machine Learning-based method for tomographic reconstruction of dense layered objects, with range of projection angles limited to $\pm $10$^\circ$. Whereas previous approaches to phase tomography generally require two steps,…
Discrete Element Method (DEM) simulations of granular media are computationally intensive, particularly during initialization phases dominated by large displacements and kinetic energy. This paper presents a novel generative pipeline based…