Related papers: Optimizing the flux coupling between a nanoSQUID a…
We present a fabrication method of superconducting quantum interference devices (SQUIDs) based on direct write lithography with an Atomic Force Microscope (AFM). This technique involves maskless local anodization of Nb or NbN ultrathin…
We present a method for fabricating Josephson junctions and superconducting quantum interference devices (SQUIDs) which is based on the local anodization of niobium strip lines 3 to 6.5 nm-thick under the voltage-biased tip of an Atomic…
We study local oxidation induced by dynamic atomic force microscopy (AFM), commonly called TappingMode AFM. This minimizes the field induced forces, which cause the tip to blunt, and enables us to use very fine tips. We are able to…
We use an atomic force microscope (AFM) to manipulate graphene films on a nanoscopic length scale. By means of local anodic oxidation with an AFM we are able to structure isolating trenches into single-layer and few-layer graphene flakes,…
Superconducting quantum interference devices (SQUIDs) are exceptionally sensitive magnetometers capable of detecting weak magnetic fields. Miniaturizing these devices and integrating them onto scanning probes enables high-resolution imaging…
We report noise measurements performed on a SQUID magnetometer implementing Grooved Dayem nanobridge of YBCO as weak-links. The SQUID shows magnetic flux noise as low as 10 $\mu \Phi_0$/Hz$^{0.5}$. The magnetometer is realized by coupling…
We demonstrate the application of Atomic Force Microscopy (AFM) based optical force microscopy to map the optical near-fields with nanometer resolution, limited only by the AFM probe geometry. We map the electric field distributions of…
Scanning superconducting quantum interference device (SQUID) microscopy is a magnetic imaging technique combining high-field sensitivity with nanometer-scale spatial resolution. State-of-the-art SQUID-on-tip probes are now playing an…
We present transport measurements of unshunted dc superconducting quantum interference devices (SQUIDs) consisting of 30 nm wide aluminum nanobridges of varying length L contacted with two and three dimensional banks. 3D nanobridge SQUIDs…
Ubiquitous in most superconducting materials and a common result of nanofabrication processes, weak-links are known for their limiting effects on the transport of electric currents. Still, they are at the root of key features of…
We present the fabrication of nanoscale superconducting quantum interference devices (SQUIDs) at the apex of wireframe tips on self-aligned superconducting cantilever probes. The probes are made on silicon wafers using molding techniques in…
Studying nanoscale dynamics is essential for understanding quantum materials and advancing quantum chip manufacturing. Still, it remains a major challenge to measure non-equilibrium properties such as current and dissipation, and their…
The magnetic properties of arrays of nanowires (NWs) and nanotubes (NTs), 150 nm in diameter, electrodeposited inside nanoporous polycarbonate membranes are investigated. The comparison of the nanoscopic magnetic force microscopy (MFM)…
Surface based geometries of microfabricated wires or patterned magnetic films can be used to magnetically trap and manipulate ultracold neutral atoms or Bose-Einstein condensates. We investigate the magnetic properties of such atom chips…
We designed and fabricated a new type of superconducting quantum interference device (SQUID) susceptometers for magnetic imaging of quantum materials. The 2-junction SQUID sensors employ 3D Nb nano-bridges fabricated using electron beam…
We report on the fabrication and characterization of microSQUID devices based on nanoscale vanadium/copper/vanadium Josephson weak links. Magnetically driven quantum interference patterns have been measured for temperatures in the 0.24 - 2…
Atomic Force Microscopy (AFM) is a suitable tool to perform tribological characterization of materials down to the nanometer scale. An important aspect in nanofriction measurements of corrugated samples is the local tilt of the surface,…
We report on the development of an ultralow noise thin-film based SQUID magnetometer. A niobium thin-film pickup coil is connected to the input coil of a SQUID current sensor. The low capacitance of the used sub-micrometer cross-type…
Since the invention of the atomic force microscope (AFM) in 1986, there has been a drive to apply this scanning probe technique or a form of this technique to various disciplines in nanoscale science. Magnetic force microscopy (MFM) is a…
Nano-scale superconducting quantum interference devices (nano-SQUIDS) where the weak-links are made from nano-bridges --- i.e., nano-bridge--SQUIDs (NBSs) --- are one of the most sensitive magnetometers for nano-scale magnetometry. Because…